List of products by brand ZCS Azzurro

ZCS Azzurro Caro: 7.4 kW single-phase charging station with a tethered 4-metre Type 2 cable, wall mounting and charge authorisation via RFID, app or Plug and Charge.
Integrates a 30 mA type A residual current device and DC fault detection down to 6 mA: in the intended configuration no separate type B RCD is required. Dynamic load balancing allows installation even on a 3 kW supply, with Wi-Fi, Ethernet and Bluetooth connectivity and integration with ZCS inverters and storage.

22 kW three-phase wallbox from the ZCS Azzurro Caro Series with a 7-metre tethered Type 2 cable, 3P+N+PE 400 V - 32 A supply. IP65 and IK08 rated for outdoor wall mounting.
Includes a 30 mA AC RCD with 6 mA DC detection, removing the need for a separate Type B residual current device. Start via Plug&Play, RFID card or app; Wi-Fi, Bluetooth and Ethernet connectivity with OCPP 1.6 JSON and dynamic load balancing for solar self-consumption.

ZCS Azzurro ZSX5000-S LiFePO4 lithium battery (ZZT-BAT-5KWH-Z5S), nominal capacity 5,1 kWh, compatible with single-phase HYD-HP inverter 3,6-6 kW. IP65, up to 4 modules in parallel, 10-year warranty.

Battery Distribution Unit (BDU) for ZCS Azzurro high voltage storage systems using 5.1 kWh ZBT 5K modules. It is the base unit of the tower, housing the BMS, the DC protection devices and the link to the inverter.
IP65 rated, inverter connection cables included. One BDU is required per battery tower, with 1-4 modules per tower.

Single-phase all-in-one storage system from ZCS Azzurro for retrofit: a 2.5 kW inverter and a 5.12 kWh LiFePO4 lithium battery in a single wall-mounted appliance.
AC coupled: it is added to an existing photovoltaic system without replacing the inverter. Expandable with several units in parallel.

High-voltage battery module ZCS Azzurro ZZT-BAT-ZBT5K, 5,12 kWh nominal, 400V, stackable up to 4 modules (20,48 kWh). Compatible with ZP1 and ZP3 inverters. IP65, external BDU required.

150 cm parallel interconnection kit for linking two ZCS Azzurro ZSX5000 battery modules or two storage boxes. Includes both the power cables and the BMS communication cable.
This is the long version, needed when the two battery packs are installed some distance apart, for example on separate walls or in separate cabinets. It is not the battery-to-inverter cable, which is the separate ZST-CABLE-KIT part number.

ZST-CABLE-KIT cable kit for connecting ZCS Azzurro single-phase hybrid inverters to LV ZSX5000 batteries or Pylontech US2000/US3000 packs. Orange/black power cables, 5-meter length.

ZZT-ZBT5K-EXT-KIT extension kit to add the 4th/5th HV ZBT 5K battery to the ZCS Azzurro storage system, positioned alongside in a second tower (not stacked). Includes additional base and parallel connection cables.

3 kW single-phase hybrid inverter from the Easy Power ZP1 series by ZCS Azzurro, with integrated PCU for battery management and off-grid operation. Works with HV ZBT 5K 400 V batteries, from 5.1 to 20.4 kWh. Charging and discharging power equal to the nominal power (3,000 W), 2 MPPT, EPS with switching under 10 ms, integrated interface protection and DC disconnector. IP65, 10-year warranty.

4 kW single-phase hybrid inverter from the Easy Power ZP1 series by ZCS Azzurro, the size that matches upgraded 4.5 kW meters. It accepts up to 6,000 W of photovoltaic power and works with HV ZBT 5K 400 V batteries from 5.1 to 20.4 kWh, with charging and discharging power equal to the nominal rating. 4,000 VA EPS, integrated interface protection and DC disconnector, IP65, 10-year warranty.

5 kW single-phase hybrid inverter from the Easy Power ZP1 series by ZCS Azzurro, the most widely used size in Italian residential applications. Accepts up to 7.500 W of photovoltaic power on 2 MPPTs and works with HV ZBT 5K at 400 V batteries from 5,1 to 20,4 kWh. 5.000 VA EPS, equal to the nominal output, with switching in under 10 ms. Integrated interface protection and DC switch-disconnector, IP65, 10-year warranty.

6 kW single-phase hybrid inverter from the Easy Power ZP1 series by ZCS Azzurro: it is the maximum size permitted for single-phase generation in Italy. Accepts up to 9.000 W of photovoltaic power on 2 MPPTs and works with HV ZBT 5K at 400 V batteries from 5,1 to 20,4 kWh. 6.000 VA EPS, equal to the nominal power. Integrated interface protection and DC switch, IP65, 10-year warranty.

Three-Phase Hybrid Inverter 6kW ZCS HYD ZP3 CEI 0-21 — inverter. Check the model, rated values and system compatibility before ordering.

ZCS Azzurro 3PH 6.6KTL-V3 three-phase string inverter, 6,6 kW with 2 independent MPPTs and Zero Feed-in function. Integrated interface protection: below the CEI 0-21 threshold of 11,08 kW, no external panel is required. IP65, 10-year warranty.

Three-phase hybrid inverter ZCS Azzurro HYD8.0K-ZP3 from the Easy Power series, 3 independent MPPTs, compatible only with ZZT-BAT-ZBT5K batteries up to 30,72 kWh per system. Integrated EPS Backup also on unbalanced loads, IP65.

Three-phase hybrid inverter ZCS Azzurro HYD10.0K-ZP3 from the Easy Power series, 3 independent MPPTs, compatible only with ZZT-BAT-ZBT5K batteries up to 30,72 kWh per system. Integrated EPS backup also on unbalanced loads, IP65.

Three-phase hybrid inverter ZCS Azzurro HYD12.0K-ZP3, maximum size of the Easy Power series, 3 independent MPPTs, ZZT-BAT-ZBT5K battery up to 30,72 kWh. Exceeds the CEI 0-21 threshold of 11,08 kW: requires external panel with DDI.

AC Combiner Box ZCS 150 kW Parallel 2 Inverters — electrical protection or combiner panel. Check the model, rated values and system compatibility before ordering.

ZCS Azzurro ZSM-METER-1PH-WIFI: single-phase bidirectional energy meter with direct connection up to 60 A (13.2 kW), without external current transformers.
Wi-Fi communication to the monitoring portal and RS485 to the inverter, class 1 accuracy, LCD display, 3 W self-consumption, 35 mm DIN rail mounting, 110 x 76 x 36 mm. Required for battery management and for grid export limitation.