Batteries for photovoltaic - Reliable energy storage

Batteries

High-efficiency AGM, Gel, and Lithium batteries.

NewOut-of-Stock
SMA Storage M 4.09 kWh LFP High-Voltage Battery
Out-of-Stock
SMA Storage M STM-BM-4.09-10: lithium iron phosphate battery module with 4.09 kWh usable capacity for the SMA Storage M high-voltage storage system, designed for the Sunny Tripower Hybrid X three-phase hybrid inverters.It is stacked in a tower with the STM-BMS-10 BMS unit (sold separately): 3 to 12 modules, i.e. 12.3 to 49.1 kWh usable. IP66, suitable for outdoor installation, 36 kg. 10-year warranty when registered within 30 days of commissioning.
€1,349.21 Tax escl.
NewOut-of-Stock
SMA Storage M BMS Unit STM-BMS-10
Out-of-Stock
SMA STM-BMS-10: the Battery Management System unit of the SMA Storage M high-voltage storage system. You need one per tower: without the BMS, STM-BM-4.09-10 modules cannot be connected to the inverter.It manages 3 to 12 modules (12.3-49.1 kWh usable), talks to the Sunny Tripower Hybrid X over CAN, and integrates the input-side disconnection point and reverse-polarity protection. IP66, 530 x 140 x 405 mm, 11.3 kg.
€907.75 Tax escl.
Cable Kit for Solax Triple Power T58 Battery
Cable kit for SolaX Triple Power T58 batteries: one positive DC power cable (red), one negative DC cable (black) and one communication cable, all with pre-assembled connectors. It completes the connection of the T58 high-voltage battery tower without crimping connectors on site.
€76.70 Tax escl.
Rack HR140
SolaX HR140 Rack for 7 TB-HR140+1 BMS modules. 100.1kWh C&I system with LFP 280Ah batteries, 0-53°C charge / -20-53°C discharge, >6000 cycles life and 10 year warranty.
IP20 indoor design, IEC 62619/62477/UN 38.3 certifications, compatible with Aelio Solax systems only. 100-200 kWh configurations available.
€1,027.00 Tax escl.
SolaX BMS Parallel Box II G2 for T58 Batteries
The SolaX BMS Parallel Box II G2 connects SolaX Triple Power T58 batteries in parallel in a Master/Slave configuration (a T58 Master battery is required). It lets you expand storage capacity beyond a single tower, with system management and integrated protections.
€710.14 Tax escl.
SolaX T-BAT H 5.8 V3 Master Battery 5,8 kWh HV
Master module of the SolaX Triple Power V3 high-voltage storage system: 5.8 kWh nominal capacity with LFP technology and integrated BMS, the only module in the range that can operate on its own. 95% depth of discharge (5.5 kWh usable), over 6,000 cycles, 10-year warranty, IP66 for outdoor installation as well. Expandable up to 34.6 kWh with HV11550 V3 slave modules.
€1,640.25 Tax escl.
SolaX HV11550 V3 Slave Battery 5,8 kWh LFP
Slave expansion module with 5,8 kWh LFP for the SolaX Triple Power V3 high-voltage storage system. It does not include the BMS and does not work on its own: it must be connected to a T-BAT H 5.8 V3 master module, up to five slaves per tower (34,6 kWh total). 95% depth of discharge, over 6.000 cycles, 10-year warranty, IP66.
€1,507.47 Tax escl.
5th Battery Extension Kit ZBT 5K ZCS Azzurro
ZZT-ZBT5K-EXT-KIT extension kit to add the 4th/5th HV ZBT 5K battery to the ZCS Azzurro storage system, positioned alongside in a second tower (not stacked). Includes additional base and parallel connection cables.
€98.33 Tax escl.
ZCS ZSX5000/Pylontech Inverter-Battery Cable Kit
ZST-CABLE-KIT cable kit for connecting ZCS Azzurro single-phase hybrid inverters to LV ZSX5000 batteries or Pylontech US2000/US3000 packs. Orange/black power cables, 5-meter length.
€39.12 Tax escl.
ZCS Azzurro ZSX5000 Battery Parallel Cable Kit 1.5m
150 cm parallel interconnection kit for linking two ZCS Azzurro ZSX5000 battery modules or two storage boxes. Includes both the power cables and the BMS communication cable.
This is the long version, needed when the two battery packs are installed some distance apart, for example on separate walls or in separate cabinets. It is not the battery-to-inverter cable, which is the separate ZST-CABLE-KIT part number.
€78.47 Tax escl.
HV ZBT 5K 5,12kWh Lithium Battery ZCS Azzurro
High-voltage battery module ZCS Azzurro ZZT-BAT-ZBT5K, 5,12 kWh nominal, 400V, stackable up to 4 modules (20,48 kWh). Compatible with ZP1 and ZP3 inverters. IP65, external BDU required.
€1,537.51 Tax escl.
ZCS Azzurro BDU for ZBT 5K High Voltage Batteries
Battery Distribution Unit (BDU) for ZCS Azzurro high voltage storage systems using 5.1 kWh ZBT 5K modules. It is the base unit of the tower, housing the BMS, the DC protection devices and the link to the inverter.
IP65 rated, inverter connection cables included. One BDU is required per battery tower, with 1-4 modules per tower.
€418.12 Tax escl.
Out-of-Stock
SolarEdge Three-Phase Backup Interface
Out-of-Stock
SolarEdge SE-BI-EU 3P (BI-EU3P) backup interface for full or partial home backup on three-phase Home Hub inverters with battery. Integrated meter, IP65, 12-year warranty. To be purchased separately from the inverter.
€689.61 Tax escl.
Out-of-Stock
Single-phase SolarEdge Backup Interface
Out-of-Stock
SolarEdge SE-BI-EU 1P Backup Interface (BI-EU1P) for full or partial home backup on single-phase Home Hub inverters with battery. IP65, up to 100 A and 3 inverters in parallel. To be purchased separately from the inverter.
€409.50 Tax escl.
SolarEdge Y Cables for Batteries in Parallel
SolarEdge IAC-RBAT-RWYCBL-01 Y-cable kit for connecting multiple Home 48V batteries in parallel to the same Home Hub or StorEdge inverter. Dedicated MC4 connectors, not replaceable with generic adapters.
€32.47 Tax escl.
SolarEdge Energy Bank Lifting Handle IAC-RBAT-HANDLE-01
IAC-RBAT-HANDLE-01 handle for handling the SolarEdge Energy Bank battery, especially useful for wall mounting. The package contains 1 piece, but 4 are required per battery: this is the most common ordering mistake for this accessory. It is not part of the final installation and can be reused for subsequent jobs.
€23.99 Tax escl.
SolarEdge Energy Bank Floor Stand Kit
SolarEdge IAC-RBAT-FLRSTD-01 floor stand kit for the Energy Bank / SolarEdge Home Battery 10 kWh.
It includes the base mount and the rear holder and is the alternative to wall mounting when the wall is not suitable. One kit per battery; multiple stands can be placed side by side and secured to each other.
€469.83 Tax escl.
Out-of-Stock
SolarEdge Home Network Kit HD-Wave with Display
Out-of-Stock
SolarEdge ENET-HBPV3D-01 upgrade kit: includes communication board with LCD display, SolarEdge Home Network plug-in and antenna.
It brings single-phase HD-Wave inverters with display (not Home Network ready from the factory) up to the current communication standard, enabling the SolarEdge Home Battery / Energy Bank and wireless control of Smart Energy devices.
€183.17 Tax escl.