List of products by brand Solax Power

Since the launch of the first hybrid inverter in Asia, SolaX Power has focused on the vision of a future powered by clean and manageable energy. Today, with the X-Hybrid series and X-ESS solutions, the brand represents the state of the art for those who wish to transform their home into a true intelligent power plant.

Why choose the SolaX Power ecosystem:

  • Leading Hybrid Inverters: The G4 series (Fourth Generation) offers extremely high efficiency, switching times of less than 10ms, and the ability to manage critical loads during emergencies (EPS function).

  • Modular Storage: SolaX's Triple Power batteries are renowned for their ease of installation and scalability, allowing the system's capacity to be increased based on actual needs.

  • Total Integration: SolaX not only offers inverters but an ecosystem that includes electric vehicle charging stations (EV Charger) and heat pumps, all manageable via the SolaXCloud app.

  • Reliability and Certifications: Products tested to withstand extreme temperatures and certified according to the strictest European safety and grid connection standards.

SolaX Power is the perfect technological partner for those seeking a plug-and-play system, efficient and ready for the energy challenges of the future.

Out-of-Stock
SolaX TP-HS36 HV Battery Module 3.6 kWh LiFePO4
Out-of-Stock
The Solax Power TP-HS36 is a 3.6 kWh high-voltage battery module with LiFePO4 technology for residential and commercial photovoltaic storage systems. Charge/discharge current up to 50 A, IP65 protection rating, operating from -20 °C to +53 °C thanks to the integrated heater. Scalable from 7.3 to 47.9 kWh per single system, with over 6,000 cycles of service life. IEC 62619, CE, UN 38.3. certifications. Plug-and-play, can be installed by just one person.
€1,069.19 Tax escl.
SolaX TP-HS50E 5.1 kWh High Voltage Battery
High-voltage 5.1 kWh battery module (about 4.6 kWh usable at 90% DoD) with cobalt-free LiFePO4 cells, for the SolaX X1-IES (1–4 modules, up to 20.4 kWh) and X3-IES (2–6 modules, up to 30.6 kWh) storage systems.
Charge and discharge up to 50 A, over 6,000 cycles, IP66, 10-year warranty. The BMS is not integrated: it must be paired with the TBMS-MCS0800E, which manages up to 4 modules.
€1,463.44 Tax escl.
Out-of-Stock
SolaX T-BAT LD53 5.3 kWh 48V battery with BMS
Out-of-Stock
5.3 kWh battery module (5.03 usable at 95% DoD) with cobalt-free LiFePO4 cells and integrated BMS, part of the SolaX T-BAT-SYS-LV D53 low-voltage system. Nominal voltage 51.2 V, wall or floor mounting.
Expandable up to 16 modules in parallel (85.1 kWh), output current 100 A with 200 A peaks for 10 s, over 5,000 cycles, IP65, 10-year warranty.
€945.31 Tax escl.
SolaX BMS Parallel Box II — Storage up to 46 kWh
SolaX BMS Parallel Box II: connects two Triple Power T-BAT HV11550 battery strings in parallel, taking storage up to 46 kWh, with integrated BMS.
No master module required: the strings take only slave modules. Strings managed independently, 35 A maximum current, 6,000 cycles at 90% DoD. For SolaX X1-Hybrid and X3-Hybrid inverters.
€589.78 Tax escl.
Out-of-Stock
SolaX Triple Power HV11550 Slave Battery 5.8 kWh V2
Out-of-Stock
The SolaX HV11550 V2 is a 5.8 kWh LiFePO4 high-voltage slave module for Triple Power V2 storage: it expands a tower built around a T-BAT H 5.8 V2 master, up to 23.2 kWh (1 master + 3 slaves). 90% DoD, over 6,000 cycles, 10-year warranty, IP65. V2 and V3 do not mix.
€1,504.78 Tax escl.
SolaX TBMS-MCS0800 Master BMS for T-BAT HV
The Solax TBMS-MCS0800 is the master BMS module for high voltage (HV) storage systems of the T-BAT Solax series. It coordinates communication, protections, and charge/discharge cycles of up to 13 HV battery modules S3.6 and S2.5, and is compatible with X3-Hybrid G4 and X3-Ultra inverters. Dimensions: 510 × 365 × 157 mm, weight: 10 kg.
€611.08 Tax escl.
SolaX TBMS-MCS0800E BMS for TP-HS50E Batteries
The Solax TBMS-MCS0800E is the BMS (Battery Management System) module dedicated to high-voltage storage systems with TP-HS50E batteries. Compatible with X1-IES and X3-IES hybrid inverters, it manages 1 to 6 battery modules, ensuring cell balancing, over-charge/over-discharge protection and two-way communication with the inverter. Module base included.
€594.35 Tax escl.
SolaX Series Box — HV Battery Second Tower Kit
The Solax Series Box is the accessory kit required to install Solax Triple Power T-BAT-SYS-HV-S2.5 / S3.6 battery modules on two towers (columns) when the storage exceeds 9 modules. It includes an additional support base, pre-wired power and communication cables. Protection rating IP65, dimensions 510×365×152 mm, weight 8.8 kg.
€390.39 Tax escl.
SolaX Series Box THS50E — 2nd IES Battery Tower
Mandatory Solax accessory for expanding the IES system with a second TP-HS50E battery tower. Allows you to connect two towers in series, reaching up to 20 kWh (X1-IES single-phase) or 30.6 kWh (X3-IES three-phase) of storage. The package includes the Series Box, base for the second tower, power and communication cables. Compatible with Solax X1-IES and X3-IES inverters.
€612.89 Tax escl.
SolaX T-BAT-Charger — HV Triple Power Battery Charger
Dedicated Solax Power charger for Triple Power high-voltage (HV) batteries: allows direct charging of T-BAT batteries by bypassing the inverter, with precise control of the state of charge (SOC) to ±1%. Supports simultaneous charging of up to 2 batteries in series, integrated LED display for local configuration, overload protection. Global voltage range 180–264 V AC. Weight 7.1 kg — IP20.
€1,067.04 Tax escl.
Out-of-Stock
Combiner Box SolaX TCBox-70 for 3 HS51 Towers
Out-of-Stock
The SolaX TCBox-70 is the accessory that allows you to connect up to three battery towers in parallel of the TSYS-HS51 high-voltage storage system, with an operating current of up to 70 A. It is used when the required capacity exceeds that of a single 8-module tower: not to be confused with the Series Box TBHS51, which instead connects two strings in series.
€254.54 Tax escl.
Out-of-Stock
SolaX X3-HAC-22S Three-Phase 22 kW Type 2 Wallbox
Out-of-Stock
The Solax X3-HAC-22S is a 22 kW three-phase wallbox with a Type 2 socket (socket, cable not included), RFID authentication, and WiFi / Ethernet / Bluetooth / RS485×2 communication. Maximum current 32A per phase. Native integration with Solax inverters for smart solar charging with priority to photovoltaic energy. OCPP 1.6j protocol, IP54, wall or pedestal installation.
€631.71 Tax escl.
Out-of-Stock
SolaX TB-HS51 Battery HV Module 5,1 kWh
Out-of-Stock
The SolaX TB-HS51 is the 5.1 kWh high-voltage battery module of the TSYS-HS51 system: LiFePO4 cells, over 6,000 cycles at 90% DoD, integrated heating down to -30 °C, and IP66 rating. Stackable from 2 to 13 modules, from 10.2 to 66.5 kWh. Requires the TBMS-S51-8 BMS and a SolaX hybrid inverter compatible with HS series batteries.
€1,379.43 Tax escl.
Solax EVC Charging Cable Type 2 7.5 m 22 kW
The Solax EVC Cable is a charging cable for electric vehicles with Type 2 – Type 2 connectors (IEC 62196-2), 7.5 meters long, compatible with all Solax EVC wallboxes (7.2 – 11 – 22 kW). Suitable for all electric vehicles and PHEVs with a European standard socket. Charges up to 22 kW three-phase.
€272.65 Tax escl.
SolaX TBMS-S51-8 BMS for HS51 Battery Tower
The SolaX TBMS-S51-8 is the BMS and base of the TSYS-HS51 energy storage system: it manages from 2 to 8 TB-HS51 modules of 5,1 kWh (10,2-40,8 kWh per tower), with 60 A nominal and 70 A peak in charging and discharging, CAN and RS485 communication, 90% DoD and IP66 rating. Essential: without the BMS, the battery modules do not work.
€653.17 Tax escl.
Out-of-Stock
Solax EVC Floor Pedestal for Wallbox 140 cm
Out-of-Stock
The Solax EVC Pedestal is the floor-mounted support column for Solax EVC wallboxes, made of white painted steel. Dimensions: 140 × 60 × 1400 mm, weight 5 kg, internal cable routing. Ideal for company parking lots, condominium areas, and installations where there is no wall. Compatible with X1-EVC 7.2 kW and X3-EVC 11/22 kW.
€125.40 Tax escl.
SolaX Negative Power Cable 5 m T58 BAT-INV
The SolaX 5m Power Line B T58 BAT-INV is the original negative power cable for connecting the master battery SolaX Triple Power T-BAT H 5.8 (T58) to the hybrid inverter SolaX X1/X3-Hybrid. Length: 5 meters, with original pre-assembled connectors. Always use together with the Power Line A BAT-INV (positive) to complete the battery-inverter DC circuit.
€28.04 Tax escl.
Out-of-Stock
SolaX X1-HAC-7S Single-Phase Wallbox 7 kW Type 2
Out-of-Stock
The Solax X1-HAC-7S is a 7.2 kW single-phase wallbox for home charging of electric and plug-in hybrid vehicles, with a Type 2 socket, IP65/IK10 protection rating, and management via the SolaX app.
Can be integrated with your photovoltaic system to charge your car using surplus solar energy (zero-export), it supports RFID, Wi-Fi/LAN, and the OCPP protocol. Wall-mounted installation by a qualified electrician.
€541.20 Tax escl.