Store

Single-phase string inverter X1 Mini series - power 700W - version with Wifi and DC switch - Dimensions 265x342x127 mm - Weight 6kg

The SolaX HV11550 V2 is a 5.8 kWh LiFePO4 high-voltage slave module for Triple Power V2 storage: it expands a tower built around a T-BAT H 5.8 V2 master, up to 23.2 kWh (1 master + 3 slaves). 90% DoD, over 6,000 cycles, 10-year warranty, IP65. V2 and V3 do not mix.

SolaX BMS Parallel Box II: connects two Triple Power T-BAT HV11550 battery strings in parallel, taking storage up to 46 kWh, with integrated BMS.
No master module required: the strings take only slave modules. Strings managed independently, 35 A maximum current, 6,000 cycles at 90% DoD. For SolaX X1-Hybrid and X3-Hybrid inverters.

5.3 kWh battery module (5.03 usable at 95% DoD) with cobalt-free LiFePO4 cells and integrated BMS, part of the SolaX T-BAT-SYS-LV D53 low-voltage system. Nominal voltage 51.2 V, wall or floor mounting.
Expandable up to 16 modules in parallel (85.1 kWh), output current 100 A with 200 A peaks for 10 s, over 5,000 cycles, IP65, 10-year warranty.

High-voltage 5.1 kWh battery module (about 4.6 kWh usable at 90% DoD) with cobalt-free LiFePO4 cells, for the SolaX X1-IES (1–4 modules, up to 20.4 kWh) and X3-IES (2–6 modules, up to 30.6 kWh) storage systems.
Charge and discharge up to 50 A, over 6,000 cycles, IP66, 10-year warranty. The BMS is not integrated: it must be paired with the TBMS-MCS0800E, which manages up to 4 modules.

The Solax Power TP-HS36 is a 3.6 kWh high-voltage battery module with LiFePO4 technology for residential and commercial photovoltaic storage systems. Charge/discharge current up to 50 A, IP65 protection rating, operating from -20 °C to +53 °C thanks to the integrated heater. Scalable from 7.3 to 47.9 kWh per single system, with over 6,000 cycles of service life. IEC 62619, CE, UN 38.3. certifications. Plug-and-play, can be installed by just one person.

SMA Backup 1P BU-SBSE-1P-50: external box for automatic single-phase backup of systems with a Sunny Boy Smart Energy inverter. In a blackout it powers the whole single-phase supply up to 63 A and 7,300 W, without a backup loads panel.
Switchover configurable from 0 to 600 s, IP65 for indoor and outdoor use, standby under 1 W, 506 x 260 x 236 mm. It is the component that takes backup from the 3,680 W manual output of the built-in SPS to 7,300 W automatic. A connected battery is required.

The Battery Storage Combiner (SMA, code 115284-00.01) is the combining unit for commercial and industrial photovoltaic storage systems. It parallels up to 4 storage cabinets to a Sunny Tripower Storage battery inverter, with overvoltage and overcurrent protections and an IP54 rating for indoor/outdoor use.

Sunny Home Manager 2.0 - 70 x 88 x 65 mm

SMA Energy Meter EMETER-20: bidirectional three-phase meter (also usable on single-phase) with direct connection up to 63 A per phase, higher with external transformers. Measures import, export and production with 1% accuracy and a 1-second cycle, sending data via Ethernet to SMA systems.
DIN rail, 4 modules, 70 x 88 x 65 mm, 0.3 kg, IP2X, self-consumption below 3 W, 2-year warranty.

The SMA Energy Meter CT EM-3CT63A-21 provides bidirectional measurement of the energy exchanged with the grid on a three-phase system, using 3 included current transformers up to 63 A per phase. It mounts on a DIN rail (2 modules) and sends data via Ethernet to compatible SMA systems for self-consumption, battery management and export limitation.

SMA Energy Meter CT - single-phase - with current transformers

SMA Data Manager M EDMM-20: professional monitoring and control system for commercial PV plants. Manages up to 50 devices (inverters, batteries, meters, EV charger) and plants up to 2.5 MVA. Native integration with Sunny Portal ennexOS. LAN, WLAN, RS485 interfaces. DIN rail mounting — 1 kg.

SMA power supply for data manager - DIN rail mounting - input: 100-240V, output 24VDC /2.5 A

Original SMA top cover for SMA Home Storage battery towers: closes the highest module, hides the connections and provides integrated cable glands.Tool-free snap-on fit without screws, dimensions 561 x 177 x 44 mm. One is needed per tower: a 16.4 kWh system on two towers requires two. An aesthetic and cable-management accessory, not required for operation.

Original SMA base for floor installation of SMA Home Storage battery modules, for use when wall mounting is not possible.Holds up to 3 stacked HS-BM-3.28-10 modules (about 9.8 kWh) and includes 2 anti-tip brackets. Dimensions 533 × 106 × 192 mm, weight 3.5 kg. A 16.4 kWh system on two towers requires two bases.

SMA 206470-00.01 EV Charger Pedestal | EV Charging — EV charging accessory or service. Check the model, rated values and system compatibility before ordering.

SMA 206465-00.01 foundation basket for pedestal installation of the SMA EV Charger Business charging station. Base to be embedded in concrete, compatible with single (206470-00.01) and double (206463-00.01) pedestals. Ensures structural stability and routing of underground cables. Weight: 6 kg.

25 kW three-phase string inverter SMA Sunny Tripower X, top size in the series: 3 independent MPPTs, generator up to 37.5 kWp, European efficiency 98.0%.The System Manager function manages up to 5 SMA inverters and one meter, for systems up to 135 kVA, without an external datalogger. IP65 category C5, DC switch-disconnector, SMA ArcFix and I-V diagnosis as standard.

20 kW three-phase string inverter SMA Sunny Tripower X, 3 independent MPPTs, generator up to 30 kWp, nominal output current 29 A.Maximum efficiency 98.2% (European 97.9%), integrated System Manager with Sunny Portal ennexOS and SMA Dynamic Power Control for dynamic regulation down to zero feed-in. IP65, ArcFix and DC disconnector as standard; requires interface panel with SPI.