SMA 206470-00.01 EV Charger Pedestal | EV Charging
SMA 206470-00.01 EV Charger Pedestal | EV Charging — EV charging accessory or service. Check the model, rated values and system compatibility before ordering.
SMA 206470-00.01 EV Charger Pedestal: professional electric vehicle charging solution, single pedestal for EV charger, safe installation.
Official SMA data
Part number 206470-00.01 identifies the one-sided stand for SMA EV Charger Business. SMA specifies powder-coated galvanised steel, a load of approximately 40 kg on one side, dimensions of 565 × 1421.5 × 435 mm and a weight of 42.5 kg.
What is SMA 206470-00.01 EV Charger Pedestal | EV Charging used for?
SMA 206470-00.01 EV Charger Pedestal | EV Charging complements an electric-vehicle charging installation. Depending on the model, it may provide a mechanical, metering, communication or management function. It does not determine charging power on its own; compatibility must be checked against the charging station, grid, backend and design.
Specifications and checks for SMA 206470-00.01 EV Charger Pedestal | EV Charging
| Product | SMA 206470-00.01 EV Charger Pedestal | EV Charging |
| Product type | EV charging accessory or service |
| Dimensions | 56.5 × 142.15 × 43.5 cm |
| Weight | 42.5 kg |
| Installation | Qualified technician |
Compatibility and installation
Before purchasing SMA 206470-00.01 EV Charger Pedestal | EV Charging, compare the exact model, rated electrical values, connections and any communication protocol with the rest of the system. A matching brand alone does not guarantee compatibility. Sizing, wiring and commissioning must follow the manufacturer's documentation and the rules applicable at the installation site.
This page identifies the SMA 206470-00.01 EV Charger Pedestal | EV Charging variant. Power, voltage, current, number of strings, accessories and firmware may differ between products that look similar. Check the complete model designation before ordering and provide MR WATT with the details of the installed equipment whenever compatibility is uncertain.
Frequently asked questions
How do I confirm that this is the correct variant?
Compare the complete name of SMA 206470-00.01 EV Charger Pedestal | EV Charging, model designation, rated values and connectors with the design documents or the unit being replaced. Do not rely only on appearance or brand.
Who should install the product?
A qualified professional should install SMA 206470-00.01 EV Charger Pedestal | EV Charging in accordance with the manufacturer's instructions. Tightening torques, protective devices, polarity, configuration and coordination with the existing system must be checked before commissioning.
Can it be installed outdoors?
Only when the manufacturer's declared protection rating and the environmental conditions of the site allow it. Ventilation, temperature limits, clearances and protection from direct sunlight must still follow the installation manual.
What should I check before ordering?
Check single-phase or three-phase supply, voltage, current, power, interfaces, space and required accessories. For SMA 206470-00.01 EV Charger Pedestal | EV Charging, sending MR WATT a photo of the rating label or the system diagram helps prevent an incorrect order.
What should be inspected on delivery?
Check that the packaging, model and supplied items for SMA 206470-00.01 EV Charger Pedestal | EV Charging match the order and show no visible damage. Keep the manual and documents, and do not energise equipment with damaged enclosures or connectors.
