Batteries

The SolaX 5m Power Line B T58 BAT-BAT is the original negative power cable for cascading connection between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Length: 5 meters, pre-crimped terminals with quick locking. Always use in combination with the Power Line A (positive) to complete the DC circuit between battery modules.

The SolaX 5m Power Line A T58 BAT-INV is the original positive power cable for connecting the master battery SolaX Triple Power T-BAT H 5.8 (T58) to the hybrid inverter SolaX X1/X3-Hybrid. Length: 5 meters, pre-crimped terminals. Recommended when the battery and inverter are not installed next to each other.

The SolaX 5m Power Line A T58 BAT-BAT is the original positive power cable for cascading connection between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Length: 5 meters, pre-crimped terminals with quick locking. Essential for expanding the storage capacity of the T58 system when the batteries are installed at a greater distance than the supplied cables allow.

The SolaX 5m Comm Line T58 Communication Cable is the original accessory for connecting the RS485 data line between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Essential for ensuring proper communication between the master BMS and slave modules in multi-battery configurations. Length: 5 meters.

The Solax TBMS-MCS0800E is the BMS (Battery Management System) module dedicated to high-voltage storage systems with TP-HS50E batteries. Compatible with X1-IES and X3-IES hybrid inverters, it manages 1 to 6 battery modules, ensuring cell balancing, over-charge/over-discharge protection and two-way communication with the inverter. Module base included.

The Solax TBMS-MCS0800 is the master BMS module for high voltage (HV) storage systems of the T-BAT Solax series. It coordinates communication, protections, and charge/discharge cycles of up to 13 HV battery modules S3.6 and S2.5, and is compatible with X3-Hybrid G4 and X3-Ultra inverters. Dimensions: 510 × 365 × 157 mm, weight: 10 kg.

The SolaX HV11550 V2 is a 5.8 kWh LiFePO4 high-voltage slave module for Triple Power V2 storage: it expands a tower built around a T-BAT H 5.8 V2 master, up to 23.2 kWh (1 master + 3 slaves). 90% DoD, over 6,000 cycles, 10-year warranty, IP65. V2 and V3 do not mix.

SolaX BMS Parallel Box II: connects two Triple Power T-BAT HV11550 battery strings in parallel, taking storage up to 46 kWh, with integrated BMS.
No master module required: the strings take only slave modules. Strings managed independently, 35 A maximum current, 6,000 cycles at 90% DoD. For SolaX X1-Hybrid and X3-Hybrid inverters.

5.3 kWh battery module (5.03 usable at 95% DoD) with cobalt-free LiFePO4 cells and integrated BMS, part of the SolaX T-BAT-SYS-LV D53 low-voltage system. Nominal voltage 51.2 V, wall or floor mounting.
Expandable up to 16 modules in parallel (85.1 kWh), output current 100 A with 200 A peaks for 10 s, over 5,000 cycles, IP65, 10-year warranty.

High-voltage 5.1 kWh battery module (about 4.6 kWh usable at 90% DoD) with cobalt-free LiFePO4 cells, for the SolaX X1-IES (1–4 modules, up to 20.4 kWh) and X3-IES (2–6 modules, up to 30.6 kWh) storage systems.
Charge and discharge up to 50 A, over 6,000 cycles, IP66, 10-year warranty. The BMS is not integrated: it must be paired with the TBMS-MCS0800E, which manages up to 4 modules.

The Solax Power TP-HS36 is a 3.6 kWh high-voltage battery module with LiFePO4 technology for residential and commercial photovoltaic storage systems. Charge/discharge current up to 50 A, IP65 protection rating, operating from -20 °C to +53 °C thanks to the integrated heater. Scalable from 7.3 to 47.9 kWh per single system, with over 6,000 cycles of service life. IEC 62619, CE, UN 38.3. certifications. Plug-and-play, can be installed by just one person.

SMA Backup 1P BU-SBSE-1P-50: external box for automatic single-phase backup of systems with a Sunny Boy Smart Energy inverter. In a blackout it powers the whole single-phase supply up to 63 A and 7,300 W, without a backup loads panel.
Switchover configurable from 0 to 600 s, IP65 for indoor and outdoor use, standby under 1 W, 506 x 260 x 236 mm. It is the component that takes backup from the 3,680 W manual output of the built-in SPS to 7,300 W automatic. A connected battery is required.

The Battery Storage Combiner (SMA, code 115284-00.01) is the combining unit for commercial and industrial photovoltaic storage systems. It parallels up to 4 storage cabinets to a Sunny Tripower Storage battery inverter, with overvoltage and overcurrent protections and an IP54 rating for indoor/outdoor use.

Original SMA top cover for SMA Home Storage battery towers: closes the highest module, hides the connections and provides integrated cable glands.Tool-free snap-on fit without screws, dimensions 561 x 177 x 44 mm. One is needed per tower: a 16.4 kWh system on two towers requires two. An aesthetic and cable-management accessory, not required for operation.

Original SMA base for floor installation of SMA Home Storage battery modules, for use when wall mounting is not possible.Holds up to 3 stacked HS-BM-3.28-10 modules (about 9.8 kWh) and includes 2 anti-tip brackets. Dimensions 533 × 106 × 192 mm, weight 3.5 kg. A 16.4 kWh system on two towers requires two bases.

SMA Home Storage HS-BM-3.28-10: 3.28 kWh battery module in lithium iron phosphate cells, stackable, for Sunny Boy Smart Energy and Sunny Tripower Smart Energy hybrid inverters.
Scalable system from 3.28 to 16.4 kWh, with a maximum of 3 modules per tower: 4- and 5-module configurations require two columns, each with an HS-BU-10 base and HS-TC-10 cover. About 8,000 cycles, IP65, 38 kg, 10-year warranty.

The LG BPEL007HBG1 is a modular storage system made of 2 lithium-ion battery modules for 7.9 kWh total. Designed to boost self-consumption in residential PV systems, it offers IP56 protection (indoor or outdoor installation) and a 10-year warranty. 26 kg per module.

The LUNA-S1-Wall-Mounting bracket is the official support for wall-mounting Huawei LUNA2000-S1 batteries: sturdy, stable and space-saving, it simplifies installation. Dimensions 260×690×180 mm, weight 6.6 kg.

The Huawei SmartGuard 63A-T0 is the three-phase backup system for Huawei photovoltaic systems: energy continuity with ultra-fast switchover to reserve power, up to 63 A, smart load management and integrated EMMA. Compatible with Huawei three-phase inverters. Weight 17 kg.

The Huawei SmartGuard 63A-S0 is the single-phase backup system for Huawei photovoltaic systems: it ensures energy continuity with fast switchover to reserve power, smart load management and integrated EMMA. Compatible with SUN2000-L1 inverters. Weight 17 kg.