Store

Original Clip On Glass decorative panel by NOBO in tempered glass with rounded corners. Compatible with NOBO TOP 2000W and NOBO OSLO WiFi 2000W. It attaches by snapping on, without the need for tools. Available in 3 colors: White, Anthracite, Retro Blue. Dimensions: 112.5×40×5 cm — Weight: 4 kg.

Original Clip On Glass decorative panel by NOBO in tempered glass with rounded corners. Compatible with NOBO TOP 1500W and NOBO OSLO WiFi 1500W. It attaches by snapping on, without tools. Available in 3 colors: White, Anthracite, Retro Blue. Dimensions: 102.5×40×5 cm — Weight: 4 kg.

Original Clip On Glass decorative panel by NOBO in tempered glass with rounded corners. Compatible with NOBO TOP 1250W. Easily snaps on without tools. Available in 3 colors: White, Anthracite, Retro Blue. Dimensions: 92.5×40×5 cm — Weight: 4 kg.

Original Clip On Glass decorative panel by NOBO in tempered glass with rounded corners. Compatible with NOBO TOP 1000W and NOBO OSLO WiFi 1000W. Installs by snapping on, no tools required. Available in 3 colors: White, Anthracite, Retro Blue. Dimensions: 72.5×40×5 cm — Weight: 3 kg.

Original Clip On Glass decorative panel by NOBO in tempered glass with rounded corners. Compatible with NOBO TOP 750W. Easily snaps on without tools. Available in 3 colors: White, Anthracite, Retro Blue. Dimensions: 62.5×40×5 cm — Weight: 3 kg.

Original Clip On Glass decorative panel by NOBO in tempered glass with rounded corners. Compatible with NOBO TOP 500W and NOBO OSLO WiFi 500W. Installs by snapping on, no tools required. Available in 3 colors: White, Anthracite, Retro Blue. Dimensions: 52.5×40×5 cm — Weight: 2 kg.

Original TEGO Roundline E8511911 floor stand for 200 mm high electric panel heaters fitted with a power cord and plug. It converts a compatible wall-mounted model into a freestanding heater where drilling is not possible or desirable.
Designed for compatible 200 mm Roundline models; not suitable for 400 mm heaters or products with a different rear attachment. Heater not included.

The SolaX TBMS-S51-8 is the BMS and base of the TSYS-HS51 energy storage system: it manages from 2 to 8 TB-HS51 modules of 5,1 kWh (10,2-40,8 kWh per tower), with 60 A nominal and 70 A peak in charging and discharging, CAN and RS485 communication, 90% DoD and IP66 rating. Essential: without the BMS, the battery modules do not work.

The SolaX TB-HS51 is the 5.1 kWh high-voltage battery module of the TSYS-HS51 system: LiFePO4 cells, over 6,000 cycles at 90% DoD, integrated heating down to -30 °C, and IP66 rating. Stackable from 2 to 13 modules, from 10.2 to 66.5 kWh. Requires the TBMS-S51-8 BMS and a SolaX hybrid inverter compatible with HS series batteries.

Three-phase photovoltaic interface panel of 20kW for 2 inverters, compliant with CEI 0-21, protection rating IP65. Complete with test report and declaration of conformity CEI EN 61439-1/2. Ideal for advanced residential and commercial systems over 11.08 kW.

Huawei single-phase hybrid inverter 4.6 kW from the SUN2000-LB0 series: residential solution with Plug&Play LUNA2000 battery interface, 2 independent MPPTs, IP66 protection rating, integrated AFCI arc-fault protection, and natural cooling. Maximum efficiency 97.8% — compatible with SUN2000-600W-P2 optimizers. 10-year warranty (extendable to 20).

The SolaX TCBox-70 is the accessory that allows you to connect up to three battery towers in parallel of the TSYS-HS51 high-voltage storage system, with an operating current of up to 70 A. It is used when the required capacity exceeds that of a single 8-module tower: not to be confused with the Series Box TBHS51, which instead connects two strings in series.

Dedicated Solax Power charger for Triple Power high-voltage (HV) batteries: allows direct charging of T-BAT batteries by bypassing the inverter, with precise control of the state of charge (SOC) to ±1%. Supports simultaneous charging of up to 2 batteries in series, integrated LED display for local configuration, overload protection. Global voltage range 180–264 V AC. Weight 7.1 kg — IP20.

Mandatory Solax accessory for expanding the IES system with a second TP-HS50E battery tower. Allows you to connect two towers in series, reaching up to 20 kWh (X1-IES single-phase) or 30.6 kWh (X3-IES three-phase) of storage. The package includes the Series Box, base for the second tower, power and communication cables. Compatible with Solax X1-IES and X3-IES inverters.

The Solax Series Box is the accessory kit required to install Solax Triple Power T-BAT-SYS-HV-S2.5 / S3.6 battery modules on two towers (columns) when the storage exceeds 9 modules. It includes an additional support base, pre-wired power and communication cables. Protection rating IP65, dimensions 510×365×152 mm, weight 8.8 kg.

The Solax Pocket WiFi 3.0 Plus is the advanced Wi-Fi monitoring dongle for Solax inverters with an external antenna, live updates every 10 seconds, offline storage, and support for Modbus TCP / IEEE 2030.5. It connects to the DONGLE port of the inverter and enables real-time monitoring on SolaxCloud. Protection rating IP65, dimensions 112 × 45.7 × 28.5 mm, 24-month warranty.

The Solax Pocket WiFi+LAN is the dual-mode monitoring dongle: it supports both 2.4 GHz Wi-Fi and Ethernet (LAN 10/100 Mbps) connections, selectable during installation. Live updates every 10 seconds, offline storage, Modbus TCP / IEEE 2030.5. Waterproof RJ45 connector included. IP65, range -35 ÷ +60 °C, 24-month warranty.

The Solax Pocket LAN 3.0 is the new generation Ethernet monitoring dongle for Solax inverters: 10/100 Mbps wired connection, support for Modbus TCP and IEEE 2030.5, live monitoring every 10 seconds, offline storage. It connects to the DONGLE port of the inverter and enables SolaxCloud via cable. Protection rating IP65, dimensions 123 × 29 × 42 mm.

The Solax Pocket LAN 2.0 is the previous generation Ethernet monitoring dongle, ideal as a replacement for existing Solax systems or for legacy Solax inverters that are not compatible with version 3.0. Wired connection 10/100 Mbps, enables monitoring on SolaxCloud. Protection rating IP65, dimensions 123 × 29 × 42 mm, 24-month warranty.

The Solax DataHub1000 is the centralized communication and control gateway for Solax commercial and industrial photovoltaic systems: it manages up to 60 inverters, enables intelligent export control (zero feed-in), batch operations (mass configuration and firmware updates), and SCADA integration via IEC 104. 4 RS485 ports, Wi-Fi, Ethernet, auxiliary I/O. Wall or DIN rail installation. IP21, dimensions 205 × 124 × 33 mm, 24-month warranty.