TEGO Roundline Floor Stand for 20 cm Heaters E8511911
Original TEGO Roundline E8511911 floor stand for 200 mm high electric panel heaters fitted with a power cord and plug. It converts a compatible wall-mounted model into a freestanding heater where drilling is not possible or desirable.
Designed for compatible 200 mm Roundline models; not suitable for 400 mm heaters or products with a different rear attachment. Heater not included.
The TEGO Roundline E8511911 floor stand allows compatible 200 mm high TEGO electric panel heaters with a power cord and plug to be used as freestanding units. It is the dedicated accessory for placing a suitable heater on a stable floor without permanently drilling or fixing the wall.
Compatibility is not determined by wattage alone. Before ordering, check the heater height, Roundline family, cord-and-plug connection and rear mounting arrangement. The product reference is E8511911 and the associated EAN is 7393039119113.
When is a TEGO Roundline floor stand useful?
A floor-mounted heater is useful in rented homes, holiday properties, offices, workshops and rooms where wall drilling is not permitted or where the heater needs to be removed or repositioned at different times of the year.
- No permanent wall fixing.
- Suitable for seasonal or temporary heating.
- Useful in front of surfaces that cannot accept wall brackets.
- Greater freedom when arranging furniture.
- The heater can be removed without leaving plugs or brackets in the wall.
Compatibility: which TEGO heaters does it fit?
E8511911 is intended for TEGO Roundline heaters that are 200 mm high and supplied with a power cord and plug, provided they use the corresponding support attachment. Swedish retailers also identify it with the Roundline Reco family; later Roundline models must retain the same mechanical mounting provision.
It is not intended for 400 mm high heaters and should not be selected only by power rating. Two heaters with the same wattage may have different heights, electrical connections or rear brackets. Check the heater code and documentation when compatibility is uncertain.
E8511911 technical details
| Brand | TEGO |
| Product family | Roundline |
| Product reference | E8511911 |
| EAN | 7393039119113 |
| Product type | Fixed floor stand or heater feet |
| Main compatibility | 200 mm high Roundline heaters with cord and plug |
| Installation | Floor standing without permanent wall fixing |
| Use environment | Indoor use according to the heater instructions |
| Castors | Not included: this is a fixed stand |
| Heater included | No |
Fixed stand or mobile heater?
The accessory makes the heater freestanding, but it does not turn it into a wheeled appliance. To reposition the heater, unplug it, allow it to cool and lift it correctly without pulling the supply cable. Do not drag it across the floor.
The stand does not change the heater output, thermostat, ingress-protection rating or electrical class. All safety clearances and restrictions in the manual for the connected TEGO heater still apply.
Installation and safe-use guidance
Before fitting the stand, disconnect the heater and allow it to cool. Place it on a protected surface, fit the stand in accordance with the TEGO instructions and confirm that both sides are fully engaged and secure before returning the heater to an upright position.
Use the heater on a flat, rigid and stable floor. The cable must not be stretched or routed beneath the heater. Never cover the appliance, obstruct the convection openings or reduce the clearances from curtains, furniture and heat-sensitive materials stated by the manufacturer.
Checks to make before ordering
- Heater height: 20 cm or 200 mm.
- TEGO heater family and product code.
- Presence of a power cord and plug.
- Rear attachment compatibility with E8511911.
- No need for castors, because this product is a fixed stand.
Frequently asked questions
Does E8511911 fit every TEGO electric heater?
No. It is intended for 200 mm high Roundline heaters with a power cord, plug and the correct rear attachment. A different stand is required for 400 mm models or other mounting systems.
Is the electric heater included?
No. This product is the TEGO E8511911 floor stand; the electric panel heater is purchased separately.
Does the stand have wheels?
No. It is a fixed floor stand. Reposition the heater only after unplugging and cooling it, and lift it rather than dragging it by the cable.
Do I still need to drill the wall?
No. The purpose of the stand is to create a freestanding installation. Stability, safety clearances and the heater instructions must still be observed.
Can I choose the stand only from the heater wattage?
No. Compatibility mainly depends on the 200 mm height, Roundline family, power connection and mechanical attachment. Always verify the heater product code.
