Store

The Solax M3-40 Dual is a three-phase dual-channel smart meter rated at 40 A, with 2 sets of 100A/40mA CTs included (6 CTs in total). It simultaneously measures two generation devices: ideal for Solax storage retrofits on existing PV systems from other brands, dual Solax inverters, or dual PODs. 50 ms refresh rate, RS485 Modbus RTU, plug-and-play CTs, remote configuration via SolaxCloud APP, automatic phase and CT direction correction.

The Solax M3-40 is a three-phase smart meter rated at 40 A with 3 included 100A/40mA CTs, designed to enable export control, zero feed-in, and self-consumption optimization on Solax inverters. 50 ms refresh, RS485 Modbus RTU, plug-and-play CT, automatic phase and CT direction correction, remote configuration via SolaxCloud APP. For three-phase systems with a single inverter.

The Solax M1-40 is a single-phase smart meter rated at 40 A with 1 CT 100A/40mA included, designed to enable export control, zero feed-in, and self-consumption optimization on Solax single-phase inverters (X1-MINI, X1-BOOST, X1-SMART, X1-Hybrid, X1-FIT). 50 ms refresh, RS485 Modbus RTU, plug-and-play CT, automatic CT direction correction, remote configuration via SolaxCloud APP.

The SolaX X3-EPS Box enables the EPS (Emergency Power Supply) function in the SolaX X3-Hybrid G4 three-phase hybrid inverters. It automatically switches to emergency power from photovoltaic and batteries in ≤ 0.5 seconds, with a maximum current of 3 × 63 A and load power up to 15 kW. Integrated dual Eaton contactor, protection rating IP65.

The SolaX X1-EPS Box is the automatic switching box that enables the EPS (Emergency Power Supply) function in single-phase hybrid inverters SolaX X1-Hybrid G4. In the event of a blackout, it automatically switches within 0.5 seconds to emergency power from photovoltaic and battery sources, keeping priority loads active. It features a pre-wired double contactor and IP65 protection rating.

TP-LD53 accessory pack — battery system accessory. Check the model, rated values and system compatibility before ordering.

The SolaX 5m Power Line B T58 BAT-INV is the original negative power cable for connecting the master battery SolaX Triple Power T-BAT H 5.8 (T58) to the hybrid inverter SolaX X1/X3-Hybrid. Length: 5 meters, with original pre-assembled connectors. Always use together with the Power Line A BAT-INV (positive) to complete the battery-inverter DC circuit.

The SolaX 5m Power Line B T58 BAT-BAT is the original negative power cable for cascading connection between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Length: 5 meters, pre-crimped terminals with quick locking. Always use in combination with the Power Line A (positive) to complete the DC circuit between battery modules.

The SolaX 5m Power Line A T58 BAT-INV is the original positive power cable for connecting the master battery SolaX Triple Power T-BAT H 5.8 (T58) to the hybrid inverter SolaX X1/X3-Hybrid. Length: 5 meters, pre-crimped terminals. Recommended when the battery and inverter are not installed next to each other.

The SolaX 5m Power Line A T58 BAT-BAT is the original positive power cable for cascading connection between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Length: 5 meters, pre-crimped terminals with quick locking. Essential for expanding the storage capacity of the T58 system when the batteries are installed at a greater distance than the supplied cables allow.

The SolaX 5m Comm Line T58 Communication Cable is the original accessory for connecting the RS485 data line between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Essential for ensuring proper communication between the master BMS and slave modules in multi-battery configurations. Length: 5 meters.

The Solax TBMS-MCS0800E is the BMS (Battery Management System) module dedicated to high-voltage storage systems with TP-HS50E batteries. Compatible with X1-IES and X3-IES hybrid inverters, it manages 1 to 6 battery modules, ensuring cell balancing, over-charge/over-discharge protection and two-way communication with the inverter. Module base included.

The TA X3 Solax is the official three-phase current transformer (CT) kit for Solax X3-Hybrid G4 inverters. It includes 3 CT CTSA016 (100A/33.33 mA), one for each phase, to enable export control and zero feed-in to the grid on residential and commercial three-phase photovoltaic systems. Clamp installation, no circuit interruption required.

The TA X1 Solax is the official current transformer (CT) for the single-phase inverter Solax X1-Hybrid G4. It is clamp-mounted on the mains phase and allows the inverter to detect energy flows in order to activate export control and zero grid feed-in. A simple and quick-to-install solution, it is an alternative to the smart meter for residential systems.

The Chint DTSU666-D is the three-phase smart meter with direct connection for photovoltaic systems with Solax X3 series inverters. It measures all three phases bidirectionally up to 80 A, with RS485 Modbus RTU communication, class 1 accuracy, and IP54 protection. Essential for export control and zero grid feed-in on three-phase systems.

The Chint DTSU666-CT is the three-phase smart meter with current transformers (CT) for photovoltaic systems with Solax three-phase inverters. It measures bidirectionally up to 200 A, with RS485 Modbus RTU communication. Ideal for high-current commercial installations where direct insertion is not possible. CT set included in the supply.

The Chint DDSU666-D is the official single-phase smart meter for photovoltaic systems with Solax X1 series hybrid inverters. It measures import, export, and total energy bidirectionally with class 1 accuracy. Features RS485 Modbus RTU communication, 35 mm DIN rail mounting, and IP54 protection. Essential for enabling export control and the zero grid feed-in function.

The CT 200A/40mA is the official current transformer kit from Solax Power for the M3-40 meter. With a 200A/40mA ratio, it extends the measurement capacity up to 200 Amps for commercial three-phase photovoltaic systems. Essential for export control and zero grid feed-in when grid currents exceed the 80A limit of direct connection.

The Chint CT-600A is a 600A/5A pass-through current transformer, accuracy class 1, designed for measuring high currents in large-scale industrial, commercial, and photovoltaic electrical installations. It is compatible with smart meters, ammeters, and energy meters with a 5A CT input. Rated voltage 660V, temperature range –5°C/+40°C.

The Solax EVC Pedestal is the floor-mounted support column for Solax EVC wallboxes, made of white painted steel. Dimensions: 140 × 60 × 1400 mm, weight 5 kg, internal cable routing. Ideal for company parking lots, condominium areas, and installations where there is no wall. Compatible with X1-EVC 7.2 kW and X3-EVC 11/22 kW.