Store

Single-phase hybrid inverter ZCS Azzurro HYD3.6K-HP, AC power 3,68 kW, 48V lithium battery with charge/discharge up to 5 kW. Integrated EPS backup, energy meter with CT included, IP65 protection rating.

The SolaX BMS Parallel Box II G2 connects SolaX Triple Power T58 batteries in parallel in a Master/Slave configuration (a T58 Master battery is required). It lets you expand storage capacity beyond a single tower, with system management and integrated protections.

Master module of the SolaX Triple Power V3 high-voltage storage system: 5.8 kWh nominal capacity with LFP technology and integrated BMS, the only module in the range that can operate on its own. 95% depth of discharge (5.5 kWh usable), over 6,000 cycles, 10-year warranty, IP66 for outdoor installation as well. Expandable up to 34.6 kWh with HV11550 V3 slave modules.

Slave expansion module with 5,8 kWh LFP for the SolaX Triple Power V3 high-voltage storage system. It does not include the BMS and does not work on its own: it must be connected to a T-BAT H 5.8 V3 master module, up to five slaves per tower (34,6 kWh total). 95% depth of discharge, over 6.000 cycles, 10-year warranty, IP66.

FS2024D Inverter onda sinusoidale pura 2000W 24V con DISPLAY serie FS — inverter. Check the model, rated values and system compatibility before ordering.

SOSSEN Micro-800 is a new-generation single-phase grid microinverter designed to ensure maximum efficiency with a Wi-Fi monitoring system. It is optimized to effectively manage modern high-efficiency photovoltaic modules with an input up to 2x600 Wp and dual MPPT (total 1200Wp). In addition, it supports rapid shutdown, ensuring maximum safety. Ideal for building your balcony or portable photovoltaic system.

12-year warranty.

ZSM-WIFI-USB: Wi-Fi dongle for ZCS Azzurro inverters with a USB slot (single-phase Lite 1PH TLM-V3, hybrid and three-phase 3PH KTL-V3). The most affordable way to get your plant onto the monitoring app.
It plugs into the dedicated slot on the inverter body, is powered by the inverter and is configured from a dedicated web page. ZCS Azzurro app and portal included, no subscription.
Check before ordering: if your inverter has the circular RS232 connector you need the ZSM-WIFI-EXT model instead.

ZSM-WIFI-EXT: external Wi-Fi module with antenna for monitoring ZCS Azzurro single-phase Lite, hybrid and three-phase inverters. Connects the inverter to your home network with no cabling.
It plugs into the inverter RS232 communication port (external circular connector) and is powered by the inverter. The external antenna gives a wide coverage range even at a distance from the router.
Check before ordering: if your inverter has a USB slot you need the ZSM-WIFI-USB model instead.

ZSM-ETH-USB: Ethernet adapter for ZCS Azzurro inverters fitted with a USB port (single-phase Lite, hybrid and three-phase). Connects the inverter to the router with an RJ45 network cable, with no reliance on Wi-Fi coverage.
It plugs into the USB slot on the inverter body and is powered by the inverter itself. ZCS Azzurro app and monitoring portal included, no subscription.
Check before ordering: if your inverter has the circular RS232 connector you need the ZSM-ETH-EXT model instead.

ZSM-ETH-EXT: external Ethernet adapter for monitoring ZCS Azzurro single-phase Lite, hybrid and three-phase inverters. Connects the inverter to the router with an RJ45 network cable, with no dependency on Wi-Fi signal strength.
It plugs into the inverter RS232 communication port (external circular connector) and is powered by the inverter itself. ZCS Azzurro app and portal included.
Check before ordering: if your inverter has a USB port you need the ZSM-ETH-USB model instead.

ZCS Azzurro EASY series ZSM-DATALOG-04 datalogger: collects data from up to 4 inverters in the Azzurro range connected in a daisy chain via RS485 and sends it to the ZCS portal via Wi-Fi or Ethernet cable.
Power supply independent from the inverter: monitoring remains active even at night. ZCS Azzurro app and portal included with no subscription fee.
Warning: with a single inverter, the datalogger is not required; a Wi-Fi or Ethernet adapter is needed instead.

4G adapter with USB connector for remote monitoring of ZCS Azzurro inverters where there is no Wi-Fi coverage or network socket at the installation point.
It includes a virtual SIM built into the device with data traffic already covered for 10 years: no subscription to activate, no card to insert. Production data refreshes on the ZCS app and portal every 5 minutes.

ZCS ZSM-4G-EXT external 4G module for single-phase, three-phase and hybrid inverters, with SIM and data traffic included for 10 years. Connection via RS232 port/external circular connector, up to 31 inverters can be monitored.

ZCS Azzurro ZST-ACC-TA current transformer with a 16 mm internal diameter, for single-phase storage systems and for the zero-export function on ZCS Azzurro hybrid and retrofit inverters.
It clips around the live conductor alone, without breaking the circuit. Single-phase systems need one CT; three-phase systems need three. For larger cables, 24 mm and 36 mm versions are available.

ZCS Azzurro ZSM-METER-DTSU three-phase energy meter for reading consumption and grid exchange on ZCS Azzurro three-phase and hybrid inverters. RS485 Modbus-RTU communication and bidirectional measurement.
Mounts on a 70 mm DIN rail (4 modules). Supplied with 3 current sensors with 5 A secondary and a scale factor programmable from the display, so they do not need to be purchased separately.

ZCS Single-Phase Meter DDSU666 Direct Connection — energy metering and management device. Check the model, rated values and system compatibility before ordering.

ZCS Azzurro ZSM-METER-1PH-WIFI: single-phase bidirectional energy meter with direct connection up to 60 A (13.2 kW), without external current transformers.
Wi-Fi communication to the monitoring portal and RS485 to the inverter, class 1 accuracy, LCD display, 3 W self-consumption, 35 mm DIN rail mounting, 110 x 76 x 36 mm. Required for battery management and for grid export limitation.

AC Combiner Box ZCS 150 kW Parallel 2 Inverters — electrical protection or combiner panel. Check the model, rated values and system compatibility before ordering.

ZZT-ZBT5K-EXT-KIT extension kit to add the 4th/5th HV ZBT 5K battery to the ZCS Azzurro storage system, positioned alongside in a second tower (not stacked). Includes additional base and parallel connection cables.

ZST-CABLE-KIT cable kit for connecting ZCS Azzurro single-phase hybrid inverters to LV ZSX5000 batteries or Pylontech US2000/US3000 packs. Orange/black power cables, 5-meter length.