Best sellers

EPEVER TRIRON 4210N 40A MPPT solar charge controller for 12/24V battery systems, with PV input up to 100V Voc and rated charging power of 520W at 12V or 1040W at 24V.
The TRIRON4210N-2U version includes the DS2 display, UCS RS485 interface and two 5V USB outputs. Suitable for correctly configured lead-acid and lithium batteries; IP30 enclosure.

EPEVER TRIRON 3210N 30A MPPT solar charge controller for 12/24V battery systems, with PV input up to 100V Voc and rated charging power of 390W at 12V or 780W at 24V.
The TRIRON3210N-2U version includes the DS2 display, UCS RS485 interface and two 5V USB outputs. Suitable for correctly configured lead-acid and lithium batteries; IP30 enclosure.

Modular structure in 3mm anodized aluminium to mount 1 solar panel (max width 105cm) on a flat roof, with adjustable 30° or 45° tilt depending on exposure. Ground ballast anchoring, no drilling.

800 Wp 24V Off-Grid Solar Kit EUREKA XL with Triron MPPT 30 A, two 100 Ah lead batteries and cabling.Off-grid energy for cabins, country properties and remote sites.

Balcony PV kit with Marstek B2500 2.24 kWh storage and Marstek M2-800 800 W AC microinverter with 2 MPPTs. The microinverter is declared compliant with CEI 0-21.
Italy regulatory note: this system must not be described as “Plug & Play” under CEI 0-21, which reserves that category for systems with nominal power ≤350 W. Any use of ARERA's Comunicazione Unica must be checked on the final PV configuration; the TICA threshold is nominal plant power <800 W.

ZSM-ETH-USB: Ethernet adapter for ZCS Azzurro inverters fitted with a USB port (single-phase Lite, hybrid and three-phase). Connects the inverter to the router with an RJ45 network cable, with no reliance on Wi-Fi coverage.
It plugs into the USB slot on the inverter body and is powered by the inverter itself. ZCS Azzurro app and monitoring portal included, no subscription.
Check before ordering: if your inverter has the circular RS232 connector you need the ZSM-ETH-EXT model instead.

7.2 kW single-phase wallbox from the SolaX X1-HAC series, Type P version with integrated fixed Type 2 charging cable. Adjustable current from 6 to 32 A, IP65 and IK10 for indoor or outdoor installation, RFID and app authentication, OCPP 1.6 JSON protocol and dynamic load balancing with included CT. Integrated 30 mA AC + 6 mA DC residual current protection.

DC power cable kit connecting the SolaX X3-AELIO inverter to Triple Power HS51 batteries.Length 2 metres, cross-section 10 mm2, rating 70 A: exactly the values SolaX specifies for the system DC wiring. Cables come pre-terminated, ready to connect.

SMA eCharger EVC22-3AC-20 Three-phase Wallbox with 22 kW for smart charging of electric cars and plug-in hybrids at home. Adjustable power from 1.38 to 22 kW, native integration with photovoltaics via SMA Sunny Home Manager 2.0, automatic single/three-phase switching to maximize solar self-consumption. Type 2 socket with shutter (compatible with all European EV/PHEV vehicles). Integrated DC 6 mA residual current protection, blackout protection, IP54, IK10. RFID reader with 2 cards included, LCD display, SMA Energy app, WLAN, 2x LAN, RS485, Modbus TCP, OCPP 1.6. Made in Germany, 5-year SMA warranty.

The Solax X1-HAC-7S is a 7.2 kW single-phase wallbox for home charging of electric and plug-in hybrid vehicles, with a Type 2 socket, IP65/IK10 protection rating, and management via the SolaX app.
Can be integrated with your photovoltaic system to charge your car using surplus solar energy (zero-export), it supports RFID, Wi-Fi/LAN, and the OCPP protocol. Wall-mounted installation by a qualified electrician.

The SolaX TCBox-70 is the accessory that allows you to connect up to three battery towers in parallel of the TSYS-HS51 high-voltage storage system, with an operating current of up to 70 A. It is used when the required capacity exceeds that of a single 8-module tower: not to be confused with the Series Box TBHS51, which instead connects two strings in series.

The Solax Pocket LAN 2.0 is the previous generation Ethernet monitoring dongle, ideal as a replacement for existing Solax systems or for legacy Solax inverters that are not compatible with version 3.0. Wired connection 10/100 Mbps, enables monitoring on SolaxCloud. Protection rating IP65, dimensions 123 × 29 × 42 mm, 24-month warranty.

The Solax M3-40 Dual is a three-phase dual-channel smart meter rated at 40 A, with 2 sets of 100A/40mA CTs included (6 CTs in total). It simultaneously measures two generation devices: ideal for Solax storage retrofits on existing PV systems from other brands, dual Solax inverters, or dual PODs. 50 ms refresh rate, RS485 Modbus RTU, plug-and-play CTs, remote configuration via SolaxCloud APP, automatic phase and CT direction correction.

The SolaX X3-EPS Box enables the EPS (Emergency Power Supply) function in the SolaX X3-Hybrid G4 three-phase hybrid inverters. It automatically switches to emergency power from photovoltaic and batteries in ≤ 0.5 seconds, with a maximum current of 3 × 63 A and load power up to 15 kW. Integrated dual Eaton contactor, protection rating IP65.

The Chint DTSU666-CT is the three-phase smart meter with current transformers (CT) for photovoltaic systems with Solax three-phase inverters. It measures bidirectionally up to 200 A, with RS485 Modbus RTU communication. Ideal for high-current commercial installations where direct insertion is not possible. CT set included in the supply.

The Solax EVC Cable is a charging cable for electric vehicles with Type 2 – Type 2 connectors (IEC 62196-2), 7.5 meters long, compatible with all Solax EVC wallboxes (7.2 – 11 – 22 kW). Suitable for all electric vehicles and PHEVs with a European standard socket. Charges up to 22 kW three-phase.

Solax X1-EVC-7.2K is a 7.2 kW single-phase charger for electric vehicles, suitable for compatible home installations.

7.2 kW power
For electric car charging
Compatible with dedicated Solax systems

The Solax X1-HYB-6.0-LV is a single-phase 6 kW low-voltage hybrid inverter ideal for residential photovoltaic systems with storage. It supports 2 independent MPPTs, PV oversizing up to 200%, EPS backup function with switching time of <10 ms, and IP65 protection. Compatible with LFP and lead-acid batteries, intelligent load management via SolaxCloud.

SolaX BMS Parallel Box II: connects two Triple Power T-BAT HV11550 battery strings in parallel, taking storage up to 46 kWh, with integrated BMS.
No master module required: the strings take only slave modules. Strings managed independently, 35 A maximum current, 6,000 cycles at 90% DoD. For SolaX X1-Hybrid and X3-Hybrid inverters.

SMA Backup 1P BU-SBSE-1P-50: external box for automatic single-phase backup of systems with a Sunny Boy Smart Energy inverter. In a blackout it powers the whole single-phase supply up to 63 A and 7,300 W, without a backup loads panel.
Switchover configurable from 0 to 600 s, IP65 for indoor and outdoor use, standby under 1 W, 506 x 260 x 236 mm. It is the component that takes backup from the 3,680 W manual output of the built-in SPS to 7,300 W automatic. A connected battery is required.