Batteries

The Solax TBMS-MCS0800E is the BMS (Battery Management System) module dedicated to high-voltage storage systems with TP-HS50E batteries. Compatible with X1-IES and X3-IES hybrid inverters, it manages from 1 to 6 battery modules, ensuring cell balancing, overcharge/overdischarge protection, and bidirectional communication with the inverter. Base for modules included in the supply.

The Solax Series Box is the accessory kit required to install Solax Triple Power T-BAT-SYS-HV-S2.5 / S3.6 battery modules on two towers (columns) when the storage exceeds 9 modules. It includes an additional support base, pre-wired power and communication cables. Protection rating IP65, dimensions 510×365×152 mm, weight 8.8 kg.

Mandatory Solax accessory for expanding the IES system with a second TP-HS50E battery tower. Allows you to connect two towers in series, reaching up to 20 kWh (X1-IES single-phase) or 30.6 kWh (X3-IES three-phase) of storage. The package includes the Series Box, base for the second tower, power and communication cables. Compatible with Solax X1-IES and X3-IES inverters.

Dedicated Solax Power charger for Triple Power high-voltage (HV) batteries: allows direct charging of T-BAT batteries by bypassing the inverter, with precise control of the state of charge (SOC) to ±1%. Supports simultaneous charging of up to 2 batteries in series, integrated LED display for local configuration, overload protection. Global voltage range 180–264 V AC. Weight 7.1 kg — IP20.

The SolaX TCBox-70 is the accessory that allows you to connect up to three battery towers in parallel of the TSYS-HS51 high-voltage storage system, with an operating current of up to 70 A. It is used when the required capacity exceeds that of a single 8-module tower: not to be confused with the Series Box TBHS51, which instead connects two strings in series.

The SolaX TB-HS51 is the 5.1 kWh high-voltage battery module of the TSYS-HS51 system: LiFePO4 cells, over 6,000 cycles at 90% DoD, integrated heating down to -30 °C, and IP66 rating. Stackable from 2 to 13 modules, from 10.2 to 66.5 kWh. Requires the TBMS-S51-8 BMS and a SolaX hybrid inverter compatible with HS series batteries.

The SolaX TBMS-S51-8 is the BMS and base of the TSYS-HS51 energy storage system: it manages from 2 to 8 TB-HS51 modules of 5,1 kWh (10,2-40,8 kWh per tower), with 60 A nominal and 70 A peak in charging and discharging, CAN and RS485 communication, 90% DoD and IP66 rating. Essential: without the BMS, the battery modules do not work.

TP-LD53 accessory pack — battery system accessory. Check the model, rated values and system compatibility before ordering.

The SolaX 5m Power Line B T58 BAT-INV is the original negative power cable for connecting the master battery SolaX Triple Power T-BAT H 5.8 (T58) to the hybrid inverter SolaX X1/X3-Hybrid. Length: 5 meters, with original pre-assembled connectors. Always use together with the Power Line A BAT-INV (positive) to complete the battery-inverter DC circuit.

The SolaX 5m Power Line B T58 BAT-BAT is the original negative power cable for cascading connection between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Length: 5 meters, pre-crimped terminals with quick locking. Always use in combination with the Power Line A (positive) to complete the DC circuit between battery modules.

The SolaX 5m Power Line A T58 BAT-INV is the original positive power cable for connecting the master battery SolaX Triple Power T-BAT H 5.8 (T58) to the hybrid inverter SolaX X1/X3-Hybrid. Length: 5 meters, pre-crimped terminals. Recommended when the battery and inverter are not installed next to each other.

The SolaX 5m Power Line A T58 BAT-BAT is the original positive power cable for cascading connection between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Length: 5 meters, pre-crimped terminals with quick locking. Essential for expanding the storage capacity of the T58 system when the batteries are installed at a greater distance than the supplied cables allow.

The SolaX 5m Comm Line T58 Communication Cable is the original accessory for connecting the RS485 data line between SolaX Triple Power T-BAT H 5.8 (T58) battery modules. Essential for ensuring proper communication between the master BMS and slave modules in multi-battery configurations. Length: 5 meters.

Lithium battery module Huawei LUNA2000-5-E1 with 5 kWh capacity, featuring LiFePO4 technology and Module+ architecture. 100% DoD depth of discharge, maximum charge/discharge power of 3.5 kW per module. Expandable by combining 5 kWh and 7 kWh modules (max 3 modules per tower, up to 4 groups per MB0 inverter). Compatible with Huawei SUN2000 inverter series L1, M0, M1, MB0. Operating temperature from -20°C to +55°C. Floor installation (standard) or wall installation (optional). Battery module dimensions: 590×255×360 mm — Weight: 68 kg.

DC power cable kit connecting the SolaX X3-AELIO inverter to Triple Power HS51 batteries.Length 2 metres, cross-section 10 mm2, rating 70 A: exactly the values SolaX specifies for the system DC wiring. Cables come pre-terminated, ready to connect.

Series Box TBHS51 for SolaX Triple Power HS51 storage systems: it is the accessory that connects two battery towers when one is no longer enough.
Required for configurations beyond the 8 TB-HS51 modules of a single tower, it allows you to reach up to 13 modules, equal to 66,5 kWh, managed by a single BMS. To be ordered together with the BMS, battery modules and base module.

SolarEdge Home 48V BAT-05K48M0B-02 Battery: 4,6 kWh fully usable (100% DoD) lithium LFP storage module, DC-coupled to SolarEdge Home Hub and StorEdge three-phase inverters.
Discharge power up to 4.096 W per single module, cycle efficiency over 95%, IP65 rating for indoor or outdoor installation, and noise level below 25 dBA. Stackable up to 5 modules (23 kWh). 10-year warranty.

Solaredge SEBAT-10K1PS0B-12 — energy storage system. Check the model, rated values and system compatibility before ordering.

IAC-RBAT-5KFSTD-01 floor stand for SolarEdge Home 48V (BAT-05K48) battery towers. Optional accessory, one is required per tower and not one per module: it raises the storage system by 50 mm from the floor, useful against water ingress and on surfaces that are not perfectly level. The tower remains 540 mm wide and 240 mm deep.

IAC-RBAT-5KCBAT-01 battery-to-battery cable set for SolarEdge Home 48V storage: contains 2 DC cables, 1 communication cable and 1 grounding cable. One set is required for each additional module in the tower: none with a single battery, one with two modules, two with three modules. The connection to the inverter requires a different accessory.