Store

SolarEdge SE-BI-EU 1P Backup Interface (BI-EU1P) for full or partial home backup on single-phase Home Hub inverters with battery. IP65, up to 100 A and 3 inverters in parallel. To be purchased separately from the inverter.

SolarEdge SE-ANT-ZBWIFI-KIT external antenna kit for Wi-Fi and ZigBee communication on SolarEdge inverters.
2.4-2.5 GHz band, 5 dBi maximum gain, 360° omnidirectional pattern. Suitable for indoor or outdoor use and mountable away from the inverter for wider range. 5-year warranty.

SolarEdge IAC-RBAT-RWYCBL-01 Y-cable kit for connecting multiple Home 48V batteries in parallel to the same Home Hub or StorEdge inverter. Dedicated MC4 connectors, not replaceable with generic adapters.

IAC-RBAT-HANDLE-01 handle for handling the SolarEdge Energy Bank battery, especially useful for wall mounting. The package contains 1 piece, but 4 are required per battery: this is the most common ordering mistake for this accessory. It is not part of the final installation and can be reused for subsequent jobs.

SolarEdge IAC-RBAT-FLRSTD-01 floor stand kit for the Energy Bank / SolarEdge Home Battery 10 kWh.
It includes the base mount and the rear holder and is the alternative to wall mounting when the wall is not suitable. One kit per battery; multiple stands can be placed side by side and secured to each other.

SolarEdge ENET-HBPV3D-01 upgrade kit: includes communication board with LCD display, SolarEdge Home Network plug-in and antenna.
It brings single-phase HD-Wave inverters with display (not Home Network ready from the factory) up to the current communication standard, enabling the SolarEdge Home Battery / Energy Bank and wireless control of Smart Energy devices.

Energy Net ENET-HBNP-01 plug-in module for wireless communication between SolarEdge inverters, Energy Bank battery and SolarEdge Home devices. This is the version for inverters already Energy Net ready (codes with BE), so it does not include the communication board and costs less than the complete kit. One is required per inverter. External antenna included.

Energy Net Kit ENET-HBCL-01 for wireless communication between SolarEdge inverters, the Energy Bank battery, and SolarEdge Home devices. This is the version for inverters with SetApp not Energy Net ready configuration (codes with BN) and also includes the compatible communication board. One per inverter is required. It occupies the cellular card slot and cannot coexist with the ZigBee module.

IAC-RBAT-5KMTOP-01 top cover for SolarEdge Home 48V (BAT-05K48) battery towers. Unlike the floor stand, it is required, and one is needed per tower regardless of the number of modules: just one even for a column of three batteries, two if the storage system is split across two towers. The heights published by SolarEdge already include it.

IAC-RBAT-5KCTOW-01 tower-to-tower cable set for SolarEdge Home 48V storage: 2 DC cables, 1 communication cable and 1 grounding cable, with longer lengths than the battery-to-battery set. It is required when the modules are distributed across two separate columns, a typical setup with more than three modules per tower. It is not interchangeable with the IAC-RBAT-5KCBAT-01 set.

Battery-to-inverter cable set IAC-RBAT-5KCINV-02 for SolarEdge Home 48V storage, in the version for StorEdge inverters with code SE*K-RWS. Contains 2 DC cables, 1 communication cable and 1 grounding cable. It is not compatible with Home Hub SE*K-RWB48 inverters, for which the -01 version is required. One is needed per tower.

Battery-to-inverter cable set IAC-RBAT-5KCINV-01 for SolarEdge Home 48V storage. This is the version for inverters in the Home Hub line with code SE*K-RWB48 (SE5K, SE8K, SE10K): it is not compatible with StorEdge SE*K-RWS inverters, which require the -02 version. One is required per battery tower.

IAC-RBAT-5KCBAT-01 battery-to-battery cable set for SolarEdge Home 48V storage: contains 2 DC cables, 1 communication cable and 1 grounding cable. One set is required for each additional module in the tower: none with a single battery, one with two modules, two with three modules. The connection to the inverter requires a different accessory.

IAC-RBAT-5KFSTD-01 floor stand for SolarEdge Home 48V (BAT-05K48) battery towers. Optional accessory, one is required per tower and not one per module: it raises the storage system by 50 mm from the floor, useful against water ingress and on surfaces that are not perfectly level. The tower remains 540 mm wide and 240 mm deep.

10 kW three-phase hybrid inverter from the SolarEdge Home Hub line, with DC coupling and DC oversizing up to 200%. It is the last size below the 11,08 kW threshold of CEI 0-21, so it does not require an external interface panel. SolarEdge Home 48V battery up to 5 modules (23 kWh), 5.000 W charging and discharging. IP65, 37 kg. Backup interface not included.

Single-phase multi-range hybrid inverter from the SolarEdge Home Hub line: one single code for all sizes from 2,2 to 10 kW, selectable on site via the configuration app. Weighted efficiency up to 99%, 200% DC oversizing, battery charging also from the grid, Wi-Fi and Energy Net card already integrated. In Italy usable up to 6 kW; optional backup interface.

8 kW three-phase hybrid inverter from the SolarEdge Home Hub line: manages PV, storage and backup in a single device, with direct current coupling that avoids double conversion losses. Works with the SolarEdge Home 48V battery (up to 5 modules, 5.000 W charge/discharge). IP65, -40/+60 °C, 37 kg. Backup-ready: the interface must be purchased separately.

4.000 VA single-phase photovoltaic inverter with HD-Wave technology and maximum efficiency of 99,2%. Accepts up to 8.000 W of DC power, i.e. double the output power, to make the most of large roofs on limited connections. Only 7,8 kg, IP65, under 25 dBA without fans. 12-year warranty extendable to 25. Requires SolarEdge optimizers on each module.

3.500 VA single-phase photovoltaic inverter with HD-Wave technology and maximum efficiency of 99,2%. Accepts up to 7.000 W of DC power input, weighs 7,8 kg, is IP65 and remains below 25 dBA thanks to natural convection cooling. Commissioning with SetApp, 12-year warranty extendable to 25. Requires SolarEdge optimizers on each module.

3.000 VA single-phase photovoltaic inverter with HD-Wave technology and maximum efficiency of 99,2%. Accepts up to 6.000 W of DC power input (200% oversizing), weighs only 7,8 kg and is IP65 with noise levels below 25 dBA. Commissioning via smartphone with SetApp, 12-year warranty extendable to 25. Requires SolarEdge optimizers on each module.