Best sellers

Stannol X32-10i No-Clean Flux Pen 10 ml, halide-free, with low resin and solids content. Alcohol-based liquid flux with a precision applicator tip, leaving no visible residues after soldering. Developed by pioneers of No-Clean technology.
Ideal for PCB repairs, SMD and fine-pitch soldering, production of photovoltaic modules, and consumer electronics. Compatible with both Pb-free and leaded solder. Maximum solder bath temperature: 260 °C. IPC classification: ORL0.

Recommended article for DIY construction of photovoltaic panels

The Solax M1-40 is a single-phase smart meter rated at 40 A with 1 CT 100A/40mA included, designed to enable export control, zero feed-in, and self-consumption optimization on Solax single-phase inverters (X1-MINI, X1-BOOST, X1-SMART, X1-Hybrid, X1-FIT). 50 ms refresh, RS485 Modbus RTU, plug-and-play CT, automatic CT direction correction, remote configuration via SolaxCloud APP.

High-efficiency 80W photovoltaic module, with a 35mm anodized aluminum frame and high transmittance tempered glass, entirely produced in Italy and guaranteed for 10 years.
Recommended for maintaining the charge of service batteries in campers and boats, creating up to 5 light points, illuminating signs, and street lighting.

FIAMM FG20722 AGM 12 V 7.2 Ah Faston 6.3 mm battery: 12 V 7.2 Ah VRLA AGM battery for UPS, security and standby power.Check size, polarity, Faston 6.3 mm and charger compatibility.

Swedish electric radiator TEGO 400W low consumption h. 20cm up to 5 sqm

Swedish electric radiator TEGO 1000W low consumption h. 40cm up to 20 sqm

Swedish electric radiator TEGO 600W low consumption h. 40cm up to 10 sqm

Mini pannello fotovoltaico ideale per la ricarica di dispositivi mobili fino a 6V Il pannello ha vetro temperato sul fronte e tedlar bianco sul retro e con cornice in alluminio dotata di 4 fori che ne facilitano l'installazione. Il pannello presenta una scatola di giunzione posteriore alla quale possono essere collegati i cavi.

3mm anodized aluminium structure to mount 3 solar panels side by side (max combined width 320cm) at a fixed 45° tilt. Suitable for flat roofs with ground ballast anchoring or vertical wall mounting.

3mm anodized aluminium structure to mount 1 solar panel (max width 105cm) at a fixed 45° tilt. Suitable for flat roofs with ground ballast anchoring or vertical wall mounting.

The FLEX180M12V photovoltaic module is equipped with a high degree of efficiency.
This series is particularly suitable for all those applications where the available space for installation is limited (e.g. campers and boats) but at the same time allows for high production capacity.

The FLEX50M12V photovoltaic module is equipped with a high degree of efficiency.
This series is particularly suitable for all those applications where the available space for installation is limited (e.g., campers and boats) but at the same time allows for a high production capacity.

Solar Panel 2 V – 145 x145 mm

Maximum efficiency and compact design for your energy applications!
The solar panel 2 V in 4mm glass and black backing is the ideal choice for small-scale projects that require reliability, elegance, and consistent performance.

Accessory kit for connecting polycrystalline or monocrystalline solar cells.
Ideal item for DIY construction of photovoltaic panels.
Select the quantity of accessories (especially the tab wire) according to your needs.

FIAMM 12FGH23 AGM 12 V 5 Ah Faston 6.3 mm battery: 12 V 5 Ah VRLA AGM battery for UPS, security and standby power.Check size, polarity, Faston 6.3 mm and charger compatibility.

FIAMM 12FGL27 AGM 12 V 27 Ah battery: 27 Ah at 12 V, equal to 324 Wh nominal, in a sealed VRLA AGM design.For solar, UPS and auxiliaries: size discharge, charger and protection.

Inverter onda sinusoidale pura 2000W 24V, studiato per operare con tutti gli apparecchi elettronici, inclusi i più sensibili a sbalzi di corrente. Collegando l'inverter a una batteria, con i cavi foniti nella confezione, consentità di alimentare apparecchi con tensione a 230V.

NDS Smart-in 600 W 12 V pure sine inverter converts 12 V DC to 230 V AC with 600 W continuous and 1500 W surge.Check waveform and load compatibility, battery, cables and protection before purchase.

The M-300 24V micro wind generator with 90W is the plug and play solution for producing energy from the wind in remote locations with a 24V system. It starts up with very weak wind — just 1.5 m/s (about 5 km/h) — and thanks to the integrated charge controller, it connects directly to 24V batteries without additional components. Perfect for 24V off-grid systems, hybrid photovoltaic+wind systems, boats, cabins, mountain shelters, and remote video surveillance systems.