IAC-RBAT-FLRSTD-01
SolarEdge IAC-RBAT-FLRSTD-01 floor stand kit for the Energy Bank / SolarEdge Home Battery 10 kWh.
It includes the base mount and the rear holder and is the alternative to wall mounting when the wall is not suitable. One kit per battery; multiple stands can be placed side by side and secured to each other.
The IAC-RBAT-FLRSTD-01 kit is the original SolarEdge accessory that allows the Energy Bank (SolarEdge Home Battery) 10 kWh to be installed standing on the floor instead of fixed to a wall. Sold separately from the battery, the kit includes the base mount and the rear holder that secures the battery to the structure and keeps it stable.
When is floor mounting the better option?
The battery weighs well over 100 kg and not every wall can carry it. Plasterboard, lightweight partitions, hollow brick masonry or timber walls often fail to provide a reliable anchor, and in seismic areas designers prefer to transfer the load to the ground. The stand also solves plant rooms, garages and basements where headroom or existing services leave no space for vertical mounting.
You need one kit per battery: in a multi-module storage system several stands are placed side by side and then secured to one another to form a single stable block.
Kit specifications
| Part number | IAC-RBAT-FLRSTD-01 |
| Type | Floor stand mounting kit |
| Compatibility | SolarEdge Energy Bank / Home Battery 10 kWh |
| Capacity | 1 battery per kit (stands can be linked together) |
| Components | Base mount + rear holder + fixing hardware |
| Alternative | Wall mounting with the standard battery brackets |
| Installation | By a qualified installer, on a flat load-bearing surface |
What is included
- Base mount for the battery
- Rear holder bracket
- Screws and fixing hardware
- Manufacturer assembly instructions
Frequently asked questions
Is the stand supplied with the Energy Bank battery?
No. The battery ships with wall-mounting hardware; the IAC-RBAT-FLRSTD-01 floor stand kit is an accessory to be ordered separately, one for each battery to be installed on the floor.
How many batteries does one kit support?
One only. A system with two or more storage modules needs one kit per battery: the stands are then placed side by side and secured to each other for a stable assembly.
Can it be used outdoors?
The limiting factor is the battery, not the stand: the ambient conditions, protection rating and installation-room requirements stated in the Energy Bank manual must be observed. In any case the stand must sit on a flat, dry, load-bearing surface.
Does the stand have to be anchored to the floor?
Anchoring and anti-tipping requirements are defined in the manufacturer's assembly instructions and must be followed in full, taking into account the seismic classification of the site and the designer's specifications.
Does floor mounting change the battery performance?
No. Capacity, power and warranty remain those declared for the Energy Bank; only the mechanical installation changes. Minimum clearances and ventilation requirements in the manual still apply.