Perovskite Tandem Solar Cells: Where We Are in 2026

MR WATT / LEARNING ZONE / TECHNOLOGY

Perovskite-silicon tandem solar cells: where we are in 2026

How they work, what records they have reached, when they will reach rooftops and why waiting for them does not pay if you need a system today.

Perovskite solar cell in a laboratoryIllustrative photo · Dennis Schroeder / NREL · Wikimedia Commons · Public domain
Silicon is close to its limit. Perovskite on top of silicon promises to go beyond it.

The silicon cells in today's modules are approaching their physical efficiency limit. Adding a thin perovskite layer on top captures blue light better and pushes efficiency beyond 30%. In 2026 lab records exceed 35% and the first tandem modules have already left pilot factories. Here is where things stand, with the numbers.

35.5 %

record efficiency of a perovskite-silicon tandem cell (LONGi, July 2026)

≈ 29 %

practical limit of a silicon-only cell

≈ 2028

when the ITRPV roadmap expects significant tandem volumes

01What perovskite is

"Perovskite" is the name of a crystal structure, named after the mineral of the same name. In photovoltaics, lead-halide perovskites are used: materials that absorb light very well, can be deposited in very thin layers at low temperature and allow the bandgap to be tuned, that is, which colours of light are converted best.

On their own, perovskite cells reached efficiencies close to silicon within a few years. But their most promising use is different: working on top of a silicon cell.

02Why two cells are better than one

A cell made of a single material converts only part of the solar spectrum well: photons that are too "weak" are not absorbed, while too "energetic" ones waste the excess as heat. For silicon this sets a practical limit of around 29%.

In a tandem cell the perovskite on top absorbs blue and green light; red and infrared light passes through and is converted by the silicon below. The theoretical limit rises to about 43%.

Diagram of a thin-film perovskite cell and a perovskite-on-silicon tandem cell
Left: thin-film perovskite cell; right: perovskite-on-silicon tandem cell. Image: NREL, public domain.

  • Two-terminal (2T): the two cells are stacked and connected in series. Easier to integrate into a module, but the currents of the two cells must be matched.
  • Four-terminal (4T): the two cells work separately. Fewer electrical constraints, more components. Some manufacturers prefer it for mass production.

03The 2026 numbers

Who Result Notes
LONGi 35.5 % cell Record certified by ESTI-JRC, July 2026
LONGi 31.4 % tandem module Certified; area not stated
JinkoSolar ≈ 34.7 % cell Perovskite on a TOPCon cell
GCL 27.06 % on a 1.71 m² module 500 MW production line
Oxford PV 24.5 % commercial module First commercial sale, September 2024
Silicon (today) over 25 % module Best modules on the market

Sources: LONGi and Oxford PV announcements, TaiyangNews. Cell records are measured on small areas: a complete module always performs less.

The most important step is not the record itself but the move towards industrial formats: LONGi certified 34.3% on 261 cm² cells, while GCL exceeds 27% on a near-commercial-size module.

04What it means in watts on the roof

Efficiency decides how much power fits into a given space. On a module of about 1.7 m² the difference is clear:

Module efficiency Power on 1.7 m² Example
21 % ≈ 357 W Standard module a few years ago
23 % ≈ 391 W Today's TOPCon or back contact
25 % ≈ 425 W Best silicon modules
27 % ≈ 459 W Near-commercial tandem
30 % ≈ 510 W Tandem target

Power = area × 1,000 W/m² × efficiency, under standard conditions. Indicative values.

Where space is limited (small roofs, balconies, campers, boats, vehicles) these percentage points are worth a lot. Where space is plentiful, cost per watt matters more.

05The obstacles still open

  • Durability: perovskite is sensitive to moisture, heat, UV and ion movement inside the material. Passing certification tests is one step; proving 25-30 years in the field is another.
  • Manufacturing scale: depositing uniform layers over large areas at gigawatt rates is still being refined.
  • Cost: tandems must cost only slightly more than silicon modules to be worthwhile, even allowing for their higher power.
  • Lead: the most efficient perovskites contain small amounts of lead. Robust encapsulation and a recycling chain are needed.

This is why the ITRPV roadmap expects significant tandem volumes around 2028, while in the coming years the market will remain dominated by TOPCon, heterojunction and back contact.

06Is it worth waiting for perovskite?

The short answer: no

A system installed today starts producing straight away. Waiting 3-4 years for modules 15-20% more efficient means giving up 3-4 years of output, which is more than you would gain. And the first tandem modules will probably cost more.

It is worth keeping an eye on if space is your real limit. Meanwhile, where every centimetre counts, high-efficiency silicon cells such as SunPower back-contact cells remain the best choice, including for custom modules. To get the most from today's modules, also check the temperature coefficient: in summer it weighs as much as a few points of efficiency.

07Today's products

SOLAR CELLS

High-efficiency cells

Monocrystalline and back-contact cells for custom modules, model making, campers and space-limited projects.

View the cells →

MODULES

Solar panels

TOPCon, back-contact and heterojunction modules: the efficiency available today, ready to install.

View the panels →

KITS

Solar kits

Complete solutions for balconies, homes, campers and cabins.

View the kits →

08FAQ and further reading

Can I buy a perovskite panel for my home today?

In practice no: the first tandem modules went to commercial plants and pilot projects. For homes the market still offers silicon modules.

Can tandem cells be bought loose for DIY?

Not yet. For custom projects today, high-efficiency silicon cells are used, soldered with the techniques in our solar cell soldering guide.

How long will a tandem module last?

That is the most important open question. Manufacturers aim for warranties similar to silicon, but years of field data are needed to confirm it.

Do tandems suffer less from heat?

Available data point to promising temperature coefficients, but they depend heavily on the technology: check module by module.

Is the 35.5% record the efficiency of a panel?

No, it is that of a laboratory cell. Complete modules have additional losses and perform less.

SunPower Gen 3 and Gen 6 solar cells →

The high-efficiency silicon cells available today for custom projects.

Why solar panels produce less when it is hot →

Temperature coefficient, NOCT and ventilation with PVGIS data.

The future of solar has two layers. The present can be installed today.

Data updated to November 2026 from official announcements and industry press. Laboratory records do not match the performance of commercial modules.