ZCS Azzurro 3PH 24000TL-V3 three-phase inverter 24 kW
ZCS Azzurro 3PH 24000TL-V3: 24 kW three-phase string inverter with 2 independent MPPTs (2 strings each), 26 A per tracker and input voltage up to 1,100 V.
Maximum efficiency 98.6%, integrated DC switch and type 2 surge arresters, export limitation (requires a meter or Azzurro HUB), IP65, 425 x 513 x 189 mm, 23 kg, 10-year warranty. In Italy, above 11.08 kW an external interface panel with SPI relay is required.
The ZCS Azzurro 3PH 24000TL-V3 is a transformerless 24 kW three-phase string inverter with two independent MPPT trackers and an integrated DC disconnect switch. It is the top size of the 15-24 kW series, designed for warehouses, farms and commercial roofs.
Two thresholds to know at 24 kW
The first is grid connection. In Italy, above 11.08 kW the CEI 0-21 standard no longer accepts the inverter's built-in interface protection: the connection needs an external panel with SPI relay, interface device and test report. Other countries set their own limits in the local grid code, so check them with the distribution operator before quoting.
The second applies in Italy once the plant is running: above 20 kW it becomes a tax-registered power station, with fiscal meters, a production register and an annual declaration to the Customs Agency. A 24 kW plant falls fully within it: a recurring operating cost, not a one-off.
1,100 volts: longer strings, fewer combiner boxes
Maximum input voltage is 1,100 V, not the 1,000 V of many inverters in the same class. It looks like a detail but it changes the design: 100 V of extra headroom allows two or three more modules per string at the minimum design temperature, which means fewer strings, fewer combiner boxes and fewer metres of DC cable. On a commercial array the difference shows up directly in the wiring cost.
The MPPT range starts at 140 V with a 160 V start-up voltage, so production begins early in the morning even on short strings.
3PH 24000TL-V3 technical specifications
| Rated output power | 24,000 W three-phase |
| Maximum apparent power | 26,400 VA (110% overload) |
| Maximum current per phase | 38.3 A |
| Typical DC power | 28,800 W (not an absolute maximum) |
| Maximum DC power per MPPT | 15,000 W |
| MPPT trackers | 2 independent, 2 strings each |
| Maximum current per MPPT | 26 A (absolute current 36 A) |
| Maximum input voltage | 1,100 V (rated 650 V) |
| MPPT range / start-up | 140-1,000 V / 160 V |
| Full-load range | 540-850 V |
| Maximum efficiency | 98.6% |
| Export limitation | Adjustable from zero to rated power (requires dedicated meter or Azzurro HUB) |
| DC switch | Integrated |
| Surge arresters | Type 2, integrated on DC and AC side |
| Communication | RS485, USB; Wi-Fi, Ethernet or 4G with optional dongle |
| Protection rating | IP65 |
| Dimensions and weight | 425 x 513 x 189 mm, 23 kg |
| Warranty | 10 years |
26 A per tracker, but shared by two strings
This is the design check that matters more than power. Each tracker accepts 26 A split across two strings: roughly 13 A usable per string when the load is balanced. Large-format TOPCon modules work between 13 and 15 A at maximum power point, so the margin is tight and excess current is simply not used. Before ordering, compare the current of the chosen module with the string layout: it is the check that separates a plant that yields as expected from one that silently loses a few percentage points.
Zero export: the function is there, the component is not
Grid export limitation is continuously adjustable from zero to rated power, one of the reasons this series is chosen for commercial sites where the grid operator often imposes a cap. But the function requires a dedicated meter or the Azzurro HUB: on its own the inverter does not know the power flow at the connection point and cannot limit anything. Put the component in the quote together with the inverter.
Frequently asked questions
Do I need an external interface protection panel?
In Italy, yes: at 24 kW you are well above the 11.08 kW threshold of CEI 0-21, so an external SPI relay, interface device and test report must be attached to the connection application. In other countries the requirement depends on the local grid code.
How many modules can I connect?
The stated typical DC power is 28,800 W, but the manufacturer specifies that it is not an absolute maximum: sizing must be checked with the official ZCS configurator. The real constraints are the current per tracker (26 A over two strings) and the string open-circuit voltage at the minimum design temperature, which must not exceed 1,100 V.
Is zero export included?
The function is built into the inverter, but it needs a dedicated meter or the Azzurro HUB, sold separately. Without one of them the inverter has no measurement at the exchange point and the limitation cannot be enabled.
Is the DC disconnect switch already included?
Yes, it is integrated, as are the type 2 surge arresters on both sides. On other inverters these components must be added in an external enclosure, with extra cost and space.
Can it be installed outdoors?
Yes, the protection rating is IP65. Keep in mind that above 45 °C ambient the inverter derates: on a south-facing wall in August you lose production in the best hours. A ventilated, shaded position is always the right choice.