50W 24V Solar Panel - Battery Charging for Trucks and Lorries
Frameless photovoltaic module with very high efficiency 50W 24V, ideal for trucks, tractors, ambulances, and lorries, 5mm thickness, high transmittance tempered glass, and front junction box.
This panel is the best solution for charging and maintaining the charge of batteries in various 24V trucks, tractors, and lorries.
Thanks to the front junction box and absence of a frame, it is suitable for being glued directly onto the truck spoiler or the roof of vehicles (polyurethane resin for fixing is available on the site).
The ULTRAFLAT photovoltaic modules are made with high-efficiency monocrystalline silicon cells.
The uniqueness of these modules lies in the absence of a frame, which saves space and allows the panels to be installed even in specific situations where the panels cannot protrude, such as on boats.
The photovoltaic module is of the glass-tedlar type, resulting from a careful selection of the best materials available on the market and advanced processing technology, entirely MADE IN ITALY.
The cells are vacuum encapsulated between two sheets of EVA and protected with a highly transparent tempered glass sheet on the front and a white tedlar sheet on the back.
To make the panel thin, the classic frame was not applied; instead, a simple aluminum border with a thickness of 6mm was used to allow installation of the panel even in particular space-constrained conditions.
The SYM series modules are made with 4mm low-iron tempered glass and a textured surface, to ensure maximum efficiency even in mobile applications such as campers or marine environments, where the modules are often installed with non-ideal tilt and azimuth.
ELECTRICAL CHARACTERISTICS:
NOCT (800W/m2-20°C - AM 1.5) 47 °C
Maximum Power (Pmax)50 Wp
Short Circuit Current (Isc)1.40 A
Open Circuit Voltage (Voc)45.44 V
MPP Current (Imax)1.32 A
MPP Voltage (Vmax)37.94 V
Insulation Voltage600 Volt
PHYSICAL CHARACTERISTICS:
Dimensions (mm)900 x 410 x 5
Weight 4.5 Kg
CONSTRUCTIVE CHARACTERISTICS:
Module production locationItaly
Cell typeMonocrystalline
Number of cells72
Front side4 mm tempered glass
Rear sideMultilayer tedlar
EncapsulationEVA
Junction BoxIP65-2 bypass diodes on the front