S-line 3PH T2

The Alfen Eve Single S-line 3PH T2 is Alfen’s three-phase wallbox with 11 kW power, made in the Netherlands, designed for smart charging of electric and plug-in hybrid cars at home or in professional settings. The 3PH T2 version is three-phase (3 phases × 16A) with a Type 2 socket with shutter — without integrated cable — for maximum flexibility in using your own charging cable. It’s Alfen’s compact and elegant solution that brings the smart features of the professional range into an accessible format for home and office use.

11 kW Charging Power — up to 65 km of range per hour

With 11 kW three-phase at 16A per phase, the Eve S-Line 3PH T2 adds about 55–65 km of range for every hour of charging. Practical examples with the most popular models in Italy:

• Tesla Model 3 / Model Y (11 kW AC) — full charge in about 5–6 hours
• Volkswagen ID.3 / ID.4 (11 kW AC) — full charge in about 5–6 hours
• BMW iX3 / i4 (11 kW AC) — full charge in about 5 hours
• Hyundai Ioniq 5 / Kia EV6 (11 kW AC) — full charge in about 5 hours
• Fiat 500e (11 kW AC) — full charge in about 4 hours
• Renault Zoe (22 kW AC — charges at 11 kW on this station) — full charge in about 4–5 hours
• All plug-in hybrid PHEVs (3.7–7.4 kW AC) — the wallbox automatically adapts to the power accepted by the vehicle

The Type 2 socket with shutter (IEC 62196-2 Ed. 2) is the universal European standard: compatible with all electric and plug-in hybrid vehicles sold in Europe.

Integrated Smart Charging — Dynamic Load Balancing

The Eve S-Line supports network connection with other Alfen charging points: the Smart Charging Network system allows you to connect up to 100 single-socket stations in a single non-hierarchical mesh network, optimally distributing the load without depending on a centralized master. Key features:

• Dynamic load balancing — communicates with the smart meter to avoid exceeding the available contractual power
• Adjustable power — the charging current is adjustable to suit the installation’s available capacity
• Integrable with photovoltaic systems and energy management systems
• Ethernet / LAN RJ45 port for wired connection to router or switch

Safety — Certified Integrated Protections

The Eve S-Line 3PH meets all the requirements of the Italian CEI 64-8 section 722 standard without additional components:

• Integrated DC residual current detection up to 6 mA — eliminates the need for an external (expensive) type B RCD, compliant with regulations
• Type 2 socket with shutter — protects contacts from accidental insertion of foreign objects
• IP55 protection rating — resistant to water jets from any direction, suitable for outdoor installation
• IK10 mechanical resistance — highest impact resistance class
• Made in Europe with class A components, rigorously tested and certified

Access and Monitoring — RFID and Multicolor LED

Charging access is managed via the integrated RFID reader, which allows charging to be authorized only for users with a registered card — useful for sharing among family, colleagues, or fleet management. The system is compatible with Alfen’s E-Flux back-office platform for billing and session monitoring. The multicolor LED interface visually indicates the charging status (connected, charging, error, authorization) without the need for a display.

Automotive Compatibility — Charging Station Bonus 2026

Installing this wallbox may benefit from the Charging Station Bonus provided by MASE for private charging infrastructure. Check with your installer for applicability under the updated conditions for the current year.

Full Technical Specifications

• Model: Eve Single S-line 3PH T2
• Manufacturer: Alfen ICU B.V. (Almere, Netherlands)
• Type: three-phase (3PH)
• Max charging power: 11 kW
• Max current: 16 A per phase
• Adjustable power: yes
• Connector: Type 2 socket with shutter (IEC 62196-2 Ed.2)
• Charging cable: not included
• Access: RFID reader
• User interface: multicolor LED
• Communication: Ethernet / LAN RJ45
• Smart Charging Network: yes (up to 100 stations in mesh network)
• Dynamic load balancing: yes
• DC current detection: 6 mA integrated
• Protection rating: IP55
• Impact resistance: IK10
• Standby consumption: about 8.0 W
• Installation: wall-mounted
• Weight: about 4 kg
• Made in: Netherlands (Europe)