Home DIY off-grid photovoltaic KIT system composed by 2 PV poly modules 1 hybrid inverter 2400W power and 2 GEL 100Ah batteries

ISLAND PHOTOVOLTAIC KIT 500W/2kWh - with storage and 2400W hybrid inverter with UPS function

This kit with storage allows you to save on your bill by using the energy produced by the panels, contributing to powering household appliances

The operating logic is different from kits with net metering: in fact, the energy produced by the panels is directly stored in the GEL batteries which will provide energy to your household appliances.

The kit is made with the best modules, inverters, and batteries available on the market.

It is composed of:

• Two polycrystalline photovoltaic modules of 240/260Wp each. Total 480/520Wp.
• One inverter 3000VA 24V with 2400W effective power (with PWM charge controller and UPS function)
• Two long-life GEL batteries 12V 100Ah each. Total 2400wh (usable 1.2Kwh)

Photovoltaic with storage

Thanks to our photovoltaic kit, you can store the energy produced by the photovoltaic modules in a battery and use it when most needed.

Our hybrid inverters, the heart of the system, manage multiple inputs simultaneously:

• Photovoltaic input: The modules provided in the kit must be connected
• Battery input: The batteries must be connected at the specified voltage
• Load input: All devices to be powered at 230V must be connected (within the inverter's limit)
• Auxiliary UPS input: Connect the Enel network or a generator

How the kit with storage works

The hybrid inverter, thanks to its interactive and easy-to-program display, allows you to manage priorities.
In battery priority mode, with solar charging, the inverter charges the batteries exclusively with solar energy.
The loads will be powered directly by the modules if there is production, otherwise, they will use the charge stored in the batteries.
Once the batteries are charged, the inverter switches immediately (without interruptions) to the Enel network or an external generator to ensure power supply and service continuity.

How to connect the kit with storage

Installing and connecting our kits is extremely simple and can be done DIY.
You can also choose our support structures to fix the modules to the roof or elsewhere and other dedicated accessories for the electrical protection of the kit. For information do not hesitate to contact us.

Photovoltaic Kits with storage do not require Enel or GSE connection procedures.

Plug & Play Kits are photovoltaic kits with energy storage that allow you to power PCs, TVs, fridges, lights, and other electrical appliances directly with solar energy, achieving substantial savings on the bill.

As you can see from the graph below, on a sunny day, the energy produced is mainly in the central hours of the day, starting from 0 kW at dawn to reach the nominal power (Pn) around midday, and returning to 0 at sunset.
The energy is then fed directly into the home network through the inverter provided in the KIT.

Do I need to modify the appliances I connect?

No modifications or accessories are needed for the powered appliances: the photovoltaic system is complete with a pure sine wave inverter that generates a perfect 220 V voltage c.a., like domestic power sockets.

How much space do the panels take up?
Each panel occupies about 1.6 sqm, so for 2-4 panels you can also use a balcony, otherwise, they can be classically mounted on a flat or sloped roof, or on the ground.

If you decide to purchase this KIT, remember to download the VAT reduced self-declaration form attached to our article at the bottom of the page.

If you have any doubts, for further information do not hesitate to contact us through the appropriate contact form