100W DC-DC 3.5-35V 5A Step Up LCD Voltage Charger Power
|Article recommended for small projects realization|
8 Item Items
Warning: Last items in stock!
By buying this product you can collect up to 1 loyalty point. Your cart will total 1 loyalty point that can be converted into a voucher of 0,05 €.
|Height (inches)||40 mm|
|thickness (mil)||13 mm|
|Weight (Oz)||30 g|
|Temperature||Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)|
|Note||Easy to drive 65W 90W dual-core notebook.Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c|
|Output Voltage||3.5-35 V (step-up mode, output must be higher than the input 2V )|
|Input Voltage||3.0-33 V (Note: The boost module input voltage can not be higher than the output voltage, the output stable at the set value)|
|Output power||100 W (MAX)|
|Switch||used to switch voltage digital display,press one time it will display in/out voltage|
|Conversion efficiency||94% (measured at Input 16V, output 19V 2.5A)|
|Output Ripple||2% (MAX) 20M-bandwidth|
|Module Properties||non-isolated step-up module (BOOST)|
A boost converter (or step-up converter) is a DC-DC converter that accepts an input DC voltage and produces a higher output voltage than the input.
With the ability to adjust the output voltage, it is very useful for small projects such as a solar energy charger for notebook or other devices.
In battery-powered systems often they consist of many cells arranged in series to obtain higher voltages. It is not always possible, for lack of space or for weight issues, to put so many batteries in series especially in applications where high voltage is required. The boost converters may increase the voltage and reduce accordingly the number of cells necessary for this purpose. Two typical applications in batteries that use boost converters are hybrid electric vehicles (HEV) and lighting systems.
The Toyota Prius contains a motor that uses voltages of approximately 500 V. Without a boost converter, the Prius would require 417 batteries to power its electric motor. In fact the Prius uses only batteries 168 and then elevates the battery voltage from 202 V to 500 V. The boost converters also feed on much smaller scale devices, such as portable lighting systems. A white LED typically requires 3.3V to emit light, and a boost converter can raise the voltage of a single alkaline cell 1.5 V to power the lamp. The boost converters can also produce higher voltages to operate the fluorescentia cold cathode tubes (CCFL) in devices such as back illuminators LCD and flash lamps.
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export.
Junction Box for solar panels 6,5A simple...
High Power Led 3W Warm White round 200-220Lm...
High Power Led 5W Warm White round 400-450Lm...
High Power Led 20W 1800Lm Warm White or Cold...