KIT 4W 12 solar cells 1"x3" (26X78mm) A-grade
|This product is recommended to DIY solar photovoltaic module|
100 Item Items
Warning: Last items in stock!
No reward points for this product.
|Power (W)||4 W|
|Solar cells||36x Poli 1"x3" (26x78mm) 0.55V 0.62A|
|Diodes||1x schottky Diode 5A 100V|
|Flux||1x Dispenser 10ml Stannol flux x32-10i|
|Tab wire||3m (10') 0.15x2mm|
Our kits of DIY solar panels are the cheapest way to provide electricity from the sun and are perfect for stand-alone installations, which is isolated from other energy sources such as the national grid; usage applications are many, such as boats, mobile homes or camping in general, garden lights lighting, small appliances, electronics and much more.
Building panels is highly educational and fun, they are also versatile in that you can customize voltage / current / dimensions to suit your needs, something not possible with pre-assembled solar panels.
If you are a beginner and want to learn more about the cells and tips on how to make the welds and all the components you need, you can read our articles in the Learning Zone an watch our video tutorials
We always add some cells to compensate the breaks during welding or during transportation, in any case for any problem due to sending please contact us and we will do our best to solve all your problems, because the important thing for us it is that you remain 100% satisfied.
In all PV systems Island (then with batteries), it is essential the use of charge controllers to prevent overcharging of batteries that are not too rare cases can cause the explosion of the battery (see electrolysis).
It will be very important to mount the solar cells efficiently to ensure long life of the panel, low risk of corrosion and cracking. There are several options to achieve a good result like the encapsulation of cells within a double glazed window, the use of silicone resins as special QSIL 216 or use sheets of EVA to name just a few examples. In the Learning Zone of our website you can find other more economical methods to achieve a good result.
It is also advisable to use a soldering iron of 60W - 80W and no less powerful with flat point. You must also have the cells on a smooth surface of glass or other thermally insulating materials.
p>If you need more informations about how to build your own solar module from the beginning, please watch below video or our youtube page.
10W Mini epoxy solar panel polycrystalline...
KIT 9W 12 solar cells 2.5"x2.5" (62x62mm)...
Junction Box for solar panels 6,5A simple...
330ohm 1/4W resistor
Solar charger controller CMP03 3A 12V
PowerSonic PPS-1242 12V 4,2A Reachargeable...
Push Button 6*6mm
Mini 0.28inch DC 2.5-30V Voltage Panel Mount...
KIT 70W solar DIY composed by 36...